ZEN55 Smoke & CO Detector Bridge FAQs
Frequently Asked Questions About the ZEN55 DC Signal Sensor Find the answers to your questions quickly by searching key words! * Press the CTRL and F keys at the same time on your keyboard. A little box should pop up in your browser window. * Type in a key word in your question like "hub" or "compatible". You sho…
ZEN55 Smoke & CO Detector Bridge Change Log
Here is a list of the changes and updates we made to the ZEN55 Smoke & CO Detector Bridge so far. VER. 1.0 (released 4/2023) Original release. Hardware: * 800 Series Z-Wave chip * Pigtail wires for easy installation Firmware: 1.20 * Separate reports for smoke and CO alerts * Z-Wave Long Range ready * Smart…
When Can I Use the ZEN55 Smoke & CO Detector Bridge?
The ZEN55 Smoke & CO Detector Bridge is a unique Z-Wave device that can read analog signals from interconnected smoke and CO alarms as well as control a connected 120 V load. Please remember that the Smoke & CO Detector Bridge is NOT a security alarm component and the device is NOT part of a life-safety system. Check…
ZEN55 Smoke & CO Detector Bridge Advanced Settings
Here is a full list of advanced settings (parameters) for the ZEN55 Smoke & CO Detector Bridge: LED Indicator Parameter 1: Choose if you want the LED to indicate the on/off status of the connected load or if you want it to remain on or off at all times. Values: 0 – LED always off 1 – LED on when load on, LED off…
Zooz SmartThings Edge Drivers
SmartThings is slowly transitioning from the legacy groovy platform to the new lua platform . This creates new challenges for seamless integration as well as access to key and advanced features of our devices. As usual, we're committed to providing the best possible experience to all of our customers, regardless of …
