## With the ZEN73 Toggle Switch, you'll have access to many advanced features, like auto turn-on timer and smart bulb mode. Use the steps below to adjust any parameter setting for your ZEN73 in your Vera interface; we used on/off status recovery as **an example, **but the same method applies to any other parameter. T…
## Once you've successfully installed your ZEN73 Toggle Switch, and confirmed it works manually, it's time to include it to your smart home network! **Using the steps below, you'll have the ZEN73 paired with Home Assistant in no time:** 1. In Home Assistant: open **Configuration **> **Integrations **> **Z-Wave JS*…
## Here are the changed and updates we made to the ZEN73 On/Off Toggle Switch 700 so far. ### _VER. 1.0 (released 4/2021)_ _Original release._ **Hardware:** * Implemented simple direct 3-way solution (wires like the ZEN76 model and NOT like the old ZEN23 model in 3-way and 4-way set-ups) * 700 Series Z-Wave ch…
## The scene control functionality is available on SmartThings only if you're using a custom driver for your Zooz switches. You only have to install one custom driver for any wall switch or dimmer model on SmartThings and you only need to do it once, regardless of how many switches you're going to add. Simply follow […
## Trouble with your ZEN73? Resolve any configuration and communication issues with a hard reset. If your toggle switch is not responsive to Z-Wave commands, it may be time to reset it. We recommend trying exclusion first. If that doesn't work, try these steps: * **Hold the toggle DOWN for 10 seconds** until the L…
## We recommend using your switches with one of the custom drivers on Hubitat for best experience with scene control. [Click here][1] to install one for your switch (it applies to all of the on/off models) and [click here][2] to install one for your dimmer (applies to all Zooz dimmers) before you try adding them to yo…
## Zooz switches are designed to connect with regular mechanical on/off switches in 4-way installations to minimize installation time and device cost. You can still use multiple Zooz switches to control the same light, you just would never wire them according to the traditional diagrams in the manual but instead, use …
## **Will my ZEN73 Toggle Switch work with my Z-Wave hub?** The ZEN73 was verified as compatible with the following Z-Wave systems: * **[Z-Box Hub][1] (recommended for all Zooz products)** * 2GIG (no advanced settings or scene control available) * Abode * ADT Pulse (no advanced settings or scene control avai…
## While we developed Zooz switches with an innovative solution to accommodate 3-way installations with simple mechanical switches, you can also use 2 smart switches to control the same light, especially if it's a smart bulb. Remember that the wiring instructions in the manual can only be used in traditional 3-way set…
**Here are the technical details and specs for the ZEN73 700 Series On/Off Toggle Switch:** * **Z-Wave Frequency:** 908.42 MHz (US) * **Power:** 120 VAC, 60 Hz * **Maximum Load:** 8 A, 150 W LED/CFL, 600 W incandescent * **Z-Wave Range:** Up to 200 feet line of sight * **Dimensions:** 1.16" deep, 1.75" wide…