How Do I Perform Hard Reset on My ZEN76 On/Off Switch?
If your ZEN76 won't respond to manual or Z-Wave commands, then it's time for a reset. We recommend trying exclusion first before resetting the switch as the process can help too. But if it doesn't work, try the following reset steps: * Press and hold the lower paddle for 10 seconds or more until the LED indicat…
How Do I Perform Hard Reset on My ZEN30 Double Switch?
Hard reset can help with a variety of configuration issues. It's also a good idea to try reset if your Double Switch is unresponsive to manual or Z-Wave commands, especially if you already gave exclusion a try without any luck. To reset the Double Switch: * Press and hold the lower paddle on the dimmer for at le…
How Do I Perform Hard Reset on My ZEN32 Scene Controller?
Trouble with your ZEN32? Try factory reset! If your Scene Controller is unresponsive to manual and Z-Wave control, and you've already tried excluding the device from your network, then a factory reset is the next step. A hard reset will erase all custom settings and recorded activity, returning the device to factory…
How Do I Perform Hard Reset on My ZEN27 Dimmer?
Hard reset can help with a variety of configuration issues. It's also a good idea to try reset if your dimmer is unresponsive to Z-Wave commands, especially if you already gave exclusion a try without any luck. Tap-tap-tap’n’hold the upper paddle for 10 seconds or more to reset the dimmer. The LED indicator w…
How Do I Perform Hard Reset on My ZEN26 On/Off Switch?
Hard reset is a great option if your switch is unresponsive to Z-Wave commands. Reset can also help with a variety of configuration issues, especially if you already gave exclusion a try and found it didn't help. Just tap-tap-tap’n’hold the upper paddle for at least 10 seconds to perform hard reset. The LED i…
How Do I Perform Hard Reset on My ZSE40 4-in-1 Sensor?
This is product is discontinued and replaced with ZSE11 . What does that mean? Reset is a good move if your sensor is unresponsive to commands or shows no LED activity no matter what you try. You can reset your ZSE40 4-in-1 Sensor to factory settings by opening the battery cover to release the tamper switch an…
