How to Program 3 Zooz Switches in a Virtual 4-Way on Hubitat with Regular Bulbs
Setting up a virtual 4-way on Hubitat lets you pair three Zooz switches or dimmers to control the same light—without needing a wired connection between the switches. In this setup, the main switch or dimmer is rewired as a single pole, while the remote units connect to power, neutral, and ground only. There are thre…
How To Program 2 Zooz Switches In a Virtual 3-Way With Smart Bulbs
While we developed Zooz switches with an innovative solution to accommodate 3-way installations with simple mechanical switches, you can also use 2 smart switches to control the same light, especially if it's a smart bulb. Remember that the wiring instructions in the manual can only be used in traditional 3-way set-u…
My Z-Wave Device Won't Add To The Hub
There are a few reasons why you may be having issues pairing your new Z-Wave device to the hub. Below we list the most common causes and how to address them so you can join your product to the network quickly and start using it in no time! 1. THE DEVICE IS ALREADY ADDED TO A Z-WAVE NETWORK CAUSE: How could a b…
How To Program 2 Zooz Switches In a Virtual 3-Way With Regular Bulbs
Zooz switches were designed to connect to regular mechanical wall switches in 3-way installation to simplify the installation and reduce your product cost. But in some cases, you may want to use 2 smart switches to control the same light instead. Never use the wiring diagrams in the manual to connect 2 or more Zooz s…
ZEN77 S2 Dimmer Change Log
Here is a list of updates we made to the ZEN77 700 Series S2 Dimmer so far: VER. 1.0 (released 12/2020) Original release Firmware: 1.02 * Central scene triggers for up to 10 scenes or devices * Smart bulb mode (disable relay) * Programmable double and single click behavior * Night light mode (press and hold t…
How to Add Your ZEN30 Double Switch to the Z-Box Hub
Join the Double Switch to your Z-Box Hub and get individual control of the dimmer and relay plus full access to settings and scene control out of the box. If you're running Z-Box firmware release 5.172.18 or higher, you have the option to include your Z-Wave Long Range (ZWLR) supporting devices via the new Long Rang…
How to Program Your ZEN35 Scene Dimmer on Home Assistant
The Zooz ZEN35 is a powerful Z-Wave dimming scene controller featuring five customizable physical buttons. Each button can be individually programmed to trigger automations through Central Scene commands or to directly control other Z-Wave devices using Direct Association . This dual-mode capability allows users t…
How to Program Your ZEN32 Scene Controller on Home Assistant
The Zooz ZEN32 is a powerful Z-Wave scene controller featuring five customizable physical buttons. Each button can be individually programmed to trigger automations through Central Scene commands or to directly control other Z-Wave devices using Direct Association . This dual-mode capability allows users to choose…
ZEN27 S2 Dimmer Change Log
Here is a list of updates we made to the S2 ZEN27 model so far. VER. 1.0 (released 10/2018) Original release. Hardware: * Included new Simple Direct 3-Way Firmware: 1.0 * Included S2 security, OTA firmware updates, full ramp control, double tap from off to full brightness VER. 2.0 (released 3/2019) Hardware…
Zooz Device Compatibility
Adding new devices to your smart home is always exciting, but let's make sure they're compatible with your hub! While your hub may support Z-Wave devices, it may not always properly recognize a given device or give you access to all of the device's advanced settings or functionality. It is up to the hub platform to …
