How to Program 3 Zooz Switches in a Virtual 4-Way on Z-Box with Regular Bulbs
Setting up a virtual 4-way on the Z-Box hub lets you pair three Zooz switches or dimmers to control the same light—without needing a wired connection between the switches. In this setup, the main switch or dimmer is rewired as a single pole, while the remote units connects to power, neutral, and ground only. There a…
How To Program 3 Zooz Switches In a Virtual 4-Way With Smart Bulbs
We designed Zooz switches so that you could connect them to regular mechanical on/off switches in 4-way installations to save time and money. But in certain scenarios, you may want to use multiple smart switches in a 4-way. NEVER connect 3 Zooz switches together according to the diagrams in the user manual which cove…
How To Program 3 Zooz Switches In a Virtual 4-Way With Regular Bulbs
Zooz switches are designed to connect with regular mechanical on/off switches in 4-way installations to minimize installation time and device cost. You can still use multiple Zooz switches to control the same light, you just would never wire them according to the traditional diagrams in the manual but instead, use s…
How To Use Multiple Zooz Switches In 3-Way and 4-Way Set-Ups
While Zooz switches were designed to connect to regular on/off switches in 3-way and 4-way scenarios to reduce the amount of hardware and time involved in the installation, there are some use cases where you would like to replace all of your switches in a multi-way set-up with smart switches. We cover the best practi…
