Here is a full list of advanced settings (parameters) for the ZEN34 Remote Switch:
LED indicator mode
Parameter 1: Choose if you want the LED indicator to turn on anytime a trigger is activated (normal model) or to remain always on or off.
Values: 0 – LED indicator always off; 1 – normal mode (default); 2 – LED always on in the color specified in parameter 2; 3 – LED always on in the color specified in parameter 3.
Size: 1 byte dec
Top paddle LED indicator color
Parameter 2: Choose the color of the LED indicator to light up in normal mode when the top paddle (scene 1) is triggered.
Values: 0 – white; 1 – blue (default); 2 – green; 3 – red; 4 – magenta; 5 – yellow; 6 – cyan.
Size: 1 byte dec
Bottom paddle LED indicator color
Parameter 3: Choose the color of the LED indicator to light up in normal mode when the bottom paddle (scene 2) is triggered.
Values: 0 – white (default); 1 – blue; 2 – green; 3 – red; 4 – magenta; 5 – yellow; 6 – cyan.
Size: 1 byte dec
Wake-up time
Parameter 4: Choose how long the ZEN34 will stay awake for when manually woken up (with 7 tap up on paddle).
Values: 0 – short wake-up until it receives the wake up no more command from the hub (default); 1 – longer 30-second wake-up time (to make it easier to change multiple parameters at a time).
Size: 1 byte dec
Remote Z-Wave Dimming Duration (Multilevel Commands For Group 3)
Parameter 5: Set the time it takes to get from 0% to 100% brightness on dimmers and smart bulbs directly associated with your Remote Switch in Group 3 when pressing and holding the paddles (physical dimming) on your Remote Switch. The number entered as value corresponds to the number of seconds.
Values: 1 – 99 (seconds). Default: 5.
Size: 1 byte dec
How to Access Settings for the ZEN34 on the Most Popular Z-Wave Hubs
How to Access the Advanced Settings for the ZEN34 on Home Assistant
How to Access the Advanced Settings for the ZEN34 on HomeSeer
How to Access the Advanced Settings for the ZEN34 on Hubitat
How to Access the Advanced Settings for the ZEN34 on SmartThings
How to Access the Advanced Settings for the ZEN34 on Z-Box
Central Scene Mapping
Upper Paddle:
Scene 1, 1-5 tap, held and released
Lower Paddle:
Scene 2, 1-5 tap, held and released
Associations
Group 1: Basic set lifeline to hub
Group 2: Basic for on (top paddle) and off (bottom paddle)
Group 3: Multilevel start level change (held) and stop level change (released)
How to Program the ZEN34 on the Most Popular Hubs
How to Program the ZEN34 on Alarm.com
How to Program the ZEN34 on Home Assistant
How to Program the ZEN34 on HomeSeer
How to Program the ZEN34 on Hubitat
How to Program the ZEN34 on SmartThings
How to Program the ZEN34 on Z-Box
The ZEN34 Remote Switch can be updated via OTA firmware updates, here is how to do that. You can access all firmware files here. Questions? Just reach out to our tech support team.
