Here is a list of the changes and updates we made to the ZEN34 Remote Switch so far.
VER. 1.0 (released 10/2020)
Original release.
Hardware:
- White wall plate and magnetic base included
- Powered by 2 x CR2032 batteries
- Adjustable LED indicator (4 colors and 3 brightness levels)
- 700 Series Z-Wave Chip
Firmware: 1.0
-
Central scene command class or direct association (Groups 2 and 3) for remote control programming
-
SmartStart and S2 authenticated security
-
OTA firmware updates
VER. 1.02 (released as OTA in 3/2021)
Firmware: 1.02
-
Increased paddle sensitivity for quick single-button presses
-
Decreased wake-up time duration to save batteries
VER. 1.3 (released 7/2021)
Firmware: 1.30
-
Limited battery reports to 1 every 12 hours
-
Added parameter 4 to adjust the wake-up time duration (see all settings here)
VER. 1.4 (released 5/2022 as OTA, production: 6/2022)
Firmware: 1.40
-
Limited battery reports for Hubitat users
-
Added parameter 5 to adjust the dimming duration for associated devices in Group 3 (see all settings here)
VER. 800LR (released 11/2023)
Hardware: 2.0
- 800 Series Z-Wave chip
Firmware: 2.0
- Based on the 1.40 firmware
- Long Range ready
The ZEN34 Remote Switch can be updated via OTA firmware updates, here is how to do that. You can access all firmware files here after you register your product and create an account here. Questions? Just reach out to our tech support team.
