The ZEN34 will work with your Hubitat hub, but you may need to install the custom device driver to access the advanced settings.
If the settings don't show up right away, we recommend making sure your Hubitat hub is running on the latest platform version before installing the ZEN34 driver. It will let you change the advanced settings of your ZEN34 Remote Switch. Here are the steps for installing the driver for Hubitat:
-
Open Hubitat in your browser.
-
Click on Drivers Code in the side menu.
-
In the top right corner, click on "+New Driver" and paste the code from the following link. Please click on this link to access the code for the driver, then copy ALL of the code from the page.
-
Click Save in the top right corner.
-
You'll see a "Zooz Remote Switch ZEN34 Advanced" driver in your Drivers Code list now.
-
Now add your device to Hubitat or if you already have, assign the driver to it by going to the device view and selecting the driver name from the drop-down menu under Device Type. Then click Update Device.
The advanced driver does allow 4-tap and 5-tap control of the ZEN34 in Hubitat, but it needs to be programmed in the Rule Machine if you select custom attribute as trigger.
Let us know if you have any questions while installing the tool driver or for customizing the settings of your ZEN34, we'll be happy to help!
