How To Program Scene Control On Your Zooz Light Switches In Hubitat
We recommend using your switches with one of the custom drivers on Hubitat for best experience with scene control. Click here to install one for your switch (it applies to all of the on/off models) and click here to install one for your dimmer (applies to all Zooz dimmers) before you try adding them to your hub. …
How to Program Your ZEN32 Scene Controller on SmartThings
Once you've installed the Edge driver for your Scene Controller and added the device to your hub, it's time to program it. There are a few different ways you can assign actions to the remote control buttons. You can use the 4 remote buttons as well as the main switch button to trigger other devices and scenes in y…
How to Program Your ZEN32 Scene Controller on Hubitat
While not needed for basic operation, you may opt in for the community custom driver created by bertabcd1234 to gain access to the full multi-tap functionality and more advanced settings. At the moment, you'll only be able to use the button controller features of the device since direct association is not availa…
How To Program Scene Control On Your Zooz Light Switches
Scene control is a bonus feature on Zooz light switches that allows you to use them as smart remote controls. You can program each paddle for multi-tap triggers to turn on different connected devices in your home or even change the mode on your smart thermostat. This functionality is available only if your Z-Wave hub…
How to Program Your ZEN34 Remote Switch on Home Assistant
You'll be able to control other devices and trigger scenes from the Remote Switch by using direct association or central scene commands. The Zooz ZEN34 Remote Switch is a powerful Z-Wave remote that looks like a standard wall switch. The upper and lower paddles can be individually programmed to trigger automations t…
