You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
Looking for Z-Box Hub Support? Please click here to access the Z-Box Hub Support Portal.
announcement close button

Showing articles from Firmware Update tag

ZEN26 S2 Switch Change Log

## Here is a log of upgrades and improvements we made to the S2 ZEN26 model so far. ### _VER. 1.0 (released 10/2018)_ _Original release._ **Hardware: ** * Included new [Simple Direct 3-Way][1] **Firmware: 1.0** * Included S2 security, OTA firmware updates, built-in auto-off timer (set in seconds) ### _VER. …

ZSE29 Outdoor Motion Sensor Change Log

## Here are the changes we made to the ZSE29 model so far. ### _VER. 1.0 (released 11/2018)_ _Original release._ **Hardware: ** * Battery or USB power, motion retrigger and lux setting adjustment knobs **Firmware: 1.01** * S2 security, motion retrigger and lux settings refer to associated Z-Wave devices only…

ZEN22 Dimmer Change Log

## Here is a list of the changes and upgrades we made to the ZEN22 model so far. ### _VER. 1.0 (released 6/2016)_ _Original release._ **Hardware: ** * Included screwless wall plate * Did NOT include neutral jumper * Did NOT include 3-way functionality (single pole only) **Firmware: 20.16** * No advanced …

ZEN16 MultiRelay Change Log

## Here is a list of the changes and updates we made to the ZEN16 MultiRelay so far. ### _VER. 1.0 (released 12/2019)_ _Original release._ **Hardware: ** * Did NOT include USB C cable **Firmware: 1.0** * 3 switch types to choose from (on/off toggle fixed to position, on/off toggle regular, momentary) * Bu…

ZEN30 Double Switch Change Log

## Here are the features we added to the Double Switch so far. ### _VER. 1.03 (released 11/2019)_ _Original release._ **Hardware: ** * Low-profile 1.1" depth for better fit * Pigtail wires for easy connections * No heat sink tabs **Firmware: 1.03** * Included S2 security, OTA firmware updates, and over 2…

ZEN21 On Off Switch Change Log

## Here are the updates and improvements we made to the ZEN21 switch model so far. ### _VER. 1.0 (released 6/2016)_ _Original release._ **Hardware: ** * Included screwless wall plate * Did NOT include neutral jumper * Did NOT include 3-way functionality (single pole only) **Firmware: 20.16** * No advance…

ZEN25 S2 Double Plug Change Log

## Here is a list of updates we made to the ZEN25 model so far. ### _VER. 1.0 (released 2/2019)_ _Original release._ **Hardware: ** * Power monitoring for both outlets, on/off reports from USB port **Firmware: 1.0** * S2 security, on/off status recovery after power failure, OTA firmware updates, auto-inclusi…

ZEN15 Power Switch Change Log

## Here are the updates we made to the ZEN15 model so far. ### _VER. 1.0 (released 8/2017)_ _Original release._ **Hardware: ** * Energy monitoring, overload protection, straight plug **Firmware: 1.01** * Range test tool, power reporting frequency settings, state recovery after power failure ### _VER. 2.0 (r…

How to Perform an OTA Firmware Update on Zooz Devices in Home Assistant

## Home Assistant offers a simple way to update the firmware of your Zooz devices! **If you're looking to update the ZST10 700 stick specifically**, you'll need to follow the instructions found here instead: [How to Perform an OTA Firmware Update on Your ZST10 700 Z-Wave Stick][1]. Ensure you are running the [new ZW…

ZEN27 S2 Dimmer Change Log

## Here is a list of updates we made to the S2 ZEN27 model so far. ### _VER. 1.0 (released 10/2018)_ _Original release._ **Hardware: ** * Included new [Simple Direct 3-Way][1] **Firmware: 1.0** * Included S2 security, OTA firmware updates, full ramp control, double tap from off to full brightness ### _VER. …

scroll to top icon