How to Access Advanced Settings for My ZEN35 Scene Dimmer on Hubitat
Want to access all of the advanced settings for your ZEN35 Scene Dimmer? Until the custom driver is ready, you can use the Universal Dimmer Driver if there are any settings missing or to enable the multi-tap programming functionality Follow the simple instructions below to install the universal driver for your ZEN35…
Recommended Accessories for Your ZEN35 Scene Dimmer
The ZEN35 Scene Dimmer is an awesome addition for any smart home! If you're looking to have the ZEN35 match your wall plates, we would recommend getting Leviton white wall plates , commonly found in most hardware stores. How can I make sure I install the ZEN35 correctly? We would recommend starting with closely…
How to Dim the Connected Load with the ZEN35 Scene Dimmer
Building on the popularity of the ZEN32 Scene Controller, the ZEN35 Scene Dimmer introduces the much-requested ability to dim a connected load directly from the main button—physically or via Z-Wave. Designed in response to valuable customer feedback, this multi-functional dimmer and scene controller in one offers smo…
ZEN35 Scene Dimmer Specs
Here are the technical details for the ZEN35 Scene Dimmer: * Z-Wave Frequency: 908.42 MHz (US/CA/MX) * Power: 120 VAC, 60 Hz * Maximum Loads: 150W LED or 500W Incandescent. To be used with LED or incandescent lights only; DON’T use with receptacles, motors, fans, or tube lights. * Z-Wave Range: Up to 500 f…
ZEN35 Scene Dimmer Advanced Settings
Here is a full list of advanced settings (parameters) for the ZEN35 Scene Dimmer: LED Mode For Dimmer Button Parameter 1 : Choose if you want the LED indicator to turn on when the dimmer (light) is on or off, or if you want it to remain on or off at all times. Values : 0 – LED on when dimmer off, LED off when dimm…
ZEN35 Scene Dimmer FAQ's
Frequently Asked Questions About the ZEN35 Scene Dimmer Find the answers to your questions quickly by searching key words! * Press the CTRL and F keys at the same time on your keyboard. A little box should pop up in your browser window. * Type in a key word in your question like "hub" or "compatible". You should …
