My ZEN34 Remote Switch Isn't Powering Up
Make sure the battery tabs have been removed in order to power your Remote Switch. You'll want to use the included triangle tool to gently open the remote and access the batteries. If you remove the battery tabs and see no LED activity whatsoever, make sure the batteries are oriented properly. If you find the rem…
My ZEN32 Scene Controller Works Manually but the Blue LED Indicator is Off
By default, the LED indicators on the ZEN32 buttons will be off when they are on, and on when the buttons are off. If you're not seeing the LEDs light up at all, but still able to control any load that is connected to the relay or programmed to the buttons, then it's possible you'll need to change some settings. …
My ZEN30 Double Switch Works Manually but the LED Indicator is Off
By default, the LED indicators for both the dimmer and relay should turn off when the switch is on and on when the switch is off. First thing's first: try manually activating the LED indicator mode. This is a new feature that allows you to manually change the LED mode without go through advanced settings, so it's po…
There is No LED Activity and My ZSE40 4-in-1 Sensor is Unresponsive
This is product is discontinued and replaced with ZSE11 . What does that mean? Once the battery is inserted, the ZSE40 4-in-1 Sensor's LED indicator should flash any time you press the Z-Wave button. If you insert the battery and see no LED activity whatsoever, first check that the battery is inserted and oriente…
ZAC36 Valve Actuator LED And Sound Indicator Guide
Wondering if your Titan Water Valve Actuator is behaving correctly? Here is a list of the LED indicator sequences and beep sounds you should see when performing all of the device's basic functions. The Titan will fit on valves up to 1.25". Is your pipe larger? Reach out to us about an extension kit for the ZAC36 t…
