How to Add Your ZSE19 Multisiren to SmartThings
This is product is discontinued and has been replaced by the ZSE50 Siren & Chime : What does that mean? Documentation for the new ZSE50 Siren & Chime can be found here: ZSE50 Knowledge Base Because the device was discontinued before SmartThings moved from the groovy platform to the lua platform, we will not be…
How to Add Your ZSE42 Water Leak XS Sensor to SmartThings
Add your Smart ZSE42 to SmartThings in a few easy steps. You will need to install the custom lua Edge driver for your sensor to be correctly recognized on SmartThings. Click here for detailed installation instructions . It's best to add your sensor from the target location to establish the best route from the hub …
ZEN26 S2 On/Off Switch & Compatible Hubs
Will the ZEN26 S2 On/Off Switch work with my hub? The switch works great with the following Z-Wave systems: * Z-Box Hub (recommended for all Zooz products) * 2GIG (no advanced settings available) * ADT Pulse (no advanced settings available) * Alarm.com (no advanced settings available) * Almond (Securify) * F…
Can't Add My ZEN16 MultiRelay to SmartThings
If you're experiencing inclusion issues with your device, exclusion is always the first thing to try. Install the custom Edge driver for the device using these steps so that the MultiRelay is recognized by SmartThings correctly. Once you've confirmed that the driver has been installed, let's move on to exclus…
How to Add Your ZEN71 On/Off Switch to SmartThings
You'll have your ZEN71 Switch paired with SmartThings in no time! To access all of the advanced settings available for the 700 Series On/Off Switch, you'll want to install the custom Edge driver with the instructions located here . With the driver installed, you can go ahead and include the ZEN71 to SmartThings:…
How to Access Advanced Settings for ZEN17 Universal Relay on SmartThings
SmartThings is transitioning to a new platform (the lua platform ) which makes the old Groovy custom device handlers unusable. Don't worry! You can still access your device's advanced settings! We created new custom Edge drivers for the lua platform. Below are the instructions on how to install and if you haven't a…
How to Access Advanced Settings for ZEN77 S2 Dimmer on SmartThings
Your ZEN77 S2 Dimmer will work with the SmartThings app out of the box as a simple dimmer. In order to access all of the advanced settings, make sure to install the new custom Edge driver for the ZEN77 to fully customize your device. Below are the steps for how to install the lua Edge driver. If you haven't added on…
How to Add Your ZEN17 Universal Relay to SmartThings
You'll need to install the custom Edge driver to add the Universal Relay correctly and have full control of all the device's channels. Before including your device, ensure the ZEN17 is properly powered. The power supply only provides power to the Z-Wave chip and electronics within the unit. Therefore, the power supp…
How To Program 2 Zooz Switches In a Virtual 3-Way With Smart Bulbs
While we developed Zooz switches with an innovative solution to accommodate 3-way installations with simple mechanical switches, you can also use 2 smart switches to control the same light, especially if it's a smart bulb. Remember that the wiring instructions in the manual can only be used in traditional 3-way set-u…
ZSE19 S2 MultiSiren & Compatible Hubs
This is product is discontinued and does not have a replacement yet. New product in development. What does that mean? Will the S2 MultiSiren ZSE19 work with my hub? The S2 MultiSiren works great as a siren and sensors with the following Z-Wave systems (the smart speaker functionality is currently only available on…
