Add your Smart ZSE42 to SmartThings in a few easy steps.
You will need to install the custom lua Edge driver for your sensor to be correctly recognized on SmartThings. Click here for detailed installation instructions.
It's best to add your sensor from the target location to establish the best route from the hub on day one.
Here's how to add your ZSE42 to SmartThings:
- Tap the plus icon in the home screen
- Tap Add device
- Tap "Scan QR code"
- Scan the QR code
- if prompted to activate the device, please click the Z-Wave button on the 3 times quickly
- The app will indicate when the device connects
- Tap Edit to rename the device, and tap Done to save the name
- Tap Done to complete the setup
Having issues including the sensor to SmartThings? You may need to reset it. The best way to approach this is through a Z-Wave exclusion from the SmartThings app (it works even if the sensor has never been added to SmartThings before):
- Open your SmartThings app and locate your SmartThings hub under Devices. Tap the hub to see the device details.
-
Tap the three dots in the upper right hand corner and tap Settings
- Tap Z-Wave Utilities
- Tap Z-Wave Exclusion
- While the app is searching for a device, press the Z-Wave button on the device 3 times as quickly as possible
- The app will indicate when the device is successfully removed. Tap Done
Now you can try adding the sensor again.
If you still have any questions or run into a different issue, please get in touch here. We'll be happy to help!
