My ZSE19 Multisiren Shows Offline in SmartThings
## The error usually points to a range or connectivity issue. Let's figure this out: We always start by performing **Network Repair**. This feature refreshes the connections between the hub and devices, and allows the hub to find the best communicate route to each device. See the steps below to perform the repair: …
How Do I Perform Hard Reset on My ZSE19 Multisiren?
## Try hard reset if your device is unresponsive to button presses, the LED indicator isn't flashing at all, or if it seems "stuck" no matter what you do. After making sure the ZSE19 Multisiren is powered properly, **CLICK-CLICK- CLICK-CLICK’N’HOLD the Z-Wave button for at least 5 seconds**. The LED indicator will fl…
Can't Add My ZSE19 Multisiren to SmartThings
## Exclusion is just like a reset, and can help with a variety of configuration and connectivity issues. Let's try exclusion first. Devices don't need to be included properly to be able to be excluded. Check out the steps to exclude your ZSE19 below: 1. Open your SmartThings app and locate your SmartThings hub und…
ZSE19 S2 MultiSiren Specs
**Here are the technical details for the S2 MultiSiren ZSE19:** * **Z-Wave Signal Frequency:** 908.42 MHz * **Power:** 4 x LR14 (C Cell) battery * **Siren:** 110 dB * **Z-Wave Range:** Up to 100 feet line of sight * **Installation and Use:** Indoor Only * **Operating Temperature:** 32-104° F * **Operati…
How to Set Up Custom Audio Notifications for Your ZSE19 MultiSiren in Vera
## The ZSE19 MultiSiren uses a brand new command class called _sound switch_ to manage custom tone playback in rules and automations. Unfortunately, there are currently no hubs that use the latest Z-Wave command library that would offer full support for it. This means we had to figure out a workaround for us all to b…
Manage Files in ZSE19 MultiSiren Audio Library
### You can upload custom audio files to your ZSE19 MultiSiren to play them as part of your automation rules. Here is how to add, remove, and organize the sounds for the device. The smart speaker is only supported by selected hubs so please [check compatibility][1] first. **WHAT YOU'LL NEED** 1. Your MultiSiren and …
ZSE19 S2 MultiSiren Change Log
## Here are the updates we applied to the ZSE19 model so far. ### _VER. 1.0 (released 11/2018)_ _Original release._ **Hardware: ** * Siren alarm, smart speaker, and LED indicator all built-in, battery power **Firmware: 1.03** * S2 security, sound switch command class for smart speaker, built-in sound library…
How to Add Your ZSE19 Multisiren to SmartThings
## The Multisiren can be added via auto or manual inclusion so make sure you follow the right steps! The ZSE19, like most Zooz devices, is officially integrated with SmartThings, so you'll be able to control it remotely out of the box. However, we recommend you install a [custom device handler][1] for access to the a…
ZSE19 S2 MultiSiren & Compatible Hubs
## Will the S2 MultiSiren ZSE19 work with my hub? The S2 MultiSiren works great as a siren and sensors with the following Z-Wave systems (the smart speaker functionality is currently only available on SmartThings with a custom device handler): * **[Z-Box Hub][1] (recommended for all Zooz products)** * Almond (Se…
How to Access Advanced Settings for Your ZSE19 Multisiren on SmartThings
## The ZSE19 is officially integrated with SmartThings, and basic functionality is available for the device with the integration. Because the device was discontinued and the basic functionality is available through official integration, we will not be creating custom Lua code for the new SmartThings platform for this…
