My ZEN52 Double Relay Shows Offline in SmartThings
If inclusion was initially successful, but your ZEN52 Double Relay shows offline in SmartThings, it may indicate a range or connectivity issue. Network Repair can be used to refresh your mesh network's connections using the SmartThings app. This helps the SmartThings hub find a more efficient route to the relay. …
My ZSE70 Outdoor Motion Sensor is Not Reporting Reliably to My Hub
Are you experiencing issues with your ZSE70 Outdoor Motion sensor despite successfully installing and linking it to your hub? Do you find that it's consistently displaying incorrect status readings, such as being stuck on motion or no motion, or perhaps failing to generate reports altogether? Check out the troublesho…
Can't Add My ZSE43 Tilt | Shock XS Sensor to SmartThings
Having trouble including your ZSE43? Excluding the device may help. Even if your Tilt|Shock XS Sensor was never successfully added to SmartThings, exclusion acts as a soft reset. It can help with a variety of configuration and inclusion issues. 800 series only: Exclusion before inclusion applies to the 700 seri…
My ZSE42 Leak Sensor is Not Reporting Reliably To My Hub
Have you installed and added your ZSE42 sensor to the hub, but you're not receiving accurate reports? Is your sensor consistently showing either wet or dry status, or is it failing to generate reports? Don't worry, we've compiled the most effective troubleshooting steps for you to try before contacting our support te…
ZSE43 Tilt | Shock XS Sensor Shows Offline in SmartThings
If your ZSE43 XS sensor is included but shows offline, it may be a range or connectivity issue. The Network Repair feature can refresh your mesh network's connections using the SmartThings app. Steps for Network Repair below: * Open your SmartThings app and locate your SmartThings hub under Devices. Tap the hub…
My ZSE43 Tilt | Shock Sensor is Not Reporting Reliably To My Hub
Have you installed and integrated your ZSE43 Tilt | Shock sensor into the hub, but are encountering discrepancies in its reports? Is it persistently showing either open or closed status, or failing to provide reports altogether? Rest assured, we're equipped to guide you through the best troubleshooting measures befor…
My ZSE41 Open | Close XS Sensor Shows Offline in SmartThings
If your sensor is included but shows offline, it may point to a range or connectivity issue. You can use the Network Repair feature to refresh your mesh network's connections using the SmartThings app. See the steps for Network Repair below: * Open your SmartThings app and locate your SmartThings hub under Devi…
My ZSE41 Open | Close Sensor Is Not Reporting Reliably To My Hub
So you have your ZSE41 Open | Close sensor installed and included to the hub, but you're not seeing accurate reports? Does your sensor seem to be stuck on open or closed status, or does it seem to be missing reports? We've got you covered with the best troubleshooting steps you can take before reaching out to our sup…
There is No LED Activity and My ZSE11 Q Sensor is Unresponsive
The ZSE11 Q Sensor can be powered by 2 CR 123A batteries (included) and/or a micro-USB cable (sold separately). Once the batteries and/or USB cable are inserted, the ZSE11 Q Sensor's LED indicator should flash any time you press the Z-Wave button. * 500/700 series: The 700 series ZSE11 sensor can ONLY ever be powe…
There is No LED Activity and My ZEN51 Dry Contact Relay is Unresponsive
Is the ZEN51 Dry Contact Relay installed, but there is no LED activity, and the relay is unresponsive? Please check the list below. * First, check that you have restored power to the unit at the breaker panel, following the completion of the installation. * Ensure the device is connected to an electric power s…
