-
Can't Add My ZSE70 Outdoor Motion Sensor to Hubitat
If you find the inclusion process isn’t working for your ZSE70, then it’s time to try excluding it. While it might seem like an odd step to take, this process actually acts as a soft reset to help with any inclusion or configuration problems. You’ll be able to do this even if the ZSE70 was never added to Hubitat. Yo…
-
Can't Add My ZEN54 0-10V Dimmer to Hubitat
Trouble including the ZEN54 to Hubitat? The best step to try is exclusion! Exclusion is a quick, easy process that can be done even if the device has never been included to Hubitat. It behaves as a soft Z-Wave reset for the device, and can resolve any connectivity or configuration issues. Important Note : A stead…
-
ZEN04 Smart Plug is Offline in Hubitat
So the ZEN04 is included to Hubitat, but showing as offline? This can occur when a device is out of range or didn’t configure properly when including. Trying a Z-Wave Network Repair can help resolve the issue! Always ensure that your Hubitat platform version is up-to-date first. Next, follow steps below to initiate …
-
How to Use Your ZEN37 Wall Remote With Smart Bulbs On Hubitat
No need to wire this switch! Get easy smart bulb control from the wireless, re-chargeable ZEN37 Wall Remote. It fits in any standard electrical box or can be fixed to a wall or any flat surface for easy installation. Program the buttons on this device according to the standard scene control / central scene event inst…
-
Can't Add My ZEN53 DC Motor Controller to Hubitat
Having inclusion issues! It may sound strange, but try excluding the device first! Exclusion is a simple process that can be done even if the device has never been included to the hub. It simply acts as a soft Z-Wave reset for the device, and helps resolve any connectivity or configuration issues. Important Note …
-
ZEN05 Outdoor Smart Plug is Offline in Hubitat
Experiencing connectivity issues with your ZEN05 Outdoor Smart Plug? This can happen if it is out of range or didn’t configure properly when including. Z-Wave Network Repair can help! Ensure that your Hubitat platform version is up-to-date first. Then, you can use Z-Wave Repair to refresh your connections. Repair Z…
-
Can't Add My ZEN37 Wall Switch to Hubitat
Is the ZEN37 Wall Remote unresponsive to inclusion attempts? Exclusion is the first process to try if inclusion fails. Exclusion acts as a soft reset to help the Wall Remote be recognized by Hubitat and can be done even if the remote hasn't been added to the network. ZEN37 Exclusion Steps * Open Hubitat in your…
-
My ZAC38 Range Extender Shows Offline in Hubitat
If your ZAC38 Range Extender is powered and included to Hubitat, but is showing as offline, then this points to a range, interference, or connectivity issue. This can occur when a device is out of range, didn’t configure properly when including, or there are too many interferences between the device and the hub. Tryi…
-
My ZEN55 Smoke & CO Detector Bridge Shows Offline in Hubitat
Your ZEN55 Smoke & CO Detector Bridge is successfully included, but it's showing as “offline" in Hubitat? This is suggestive of a potential range or configuration issue. The easiest place to start is with a Z-Wave Network Repair. You always want to start by ensuring that your Hubitat hub is up to date on its platfor…
-
How to Add Your ZEN53 DC Motor Controller to Hubitat
Is the ZEN53 installed correctly and powered with a proper 6-32 VDC power source? Now it's time to include the device to your Hubitat. Including the ZEN53 DC Motor Controller to Hubitat is simple! Follow the steps below to quickly and easily add the ZEN53 to Hubitat. Please install the custom driver prior to pairing…
Looking for Z-Box Hub Support? Please click here to access the Z-Box Hub Support Portal.
