There is No LED Activity and My ZSE29 Outdoor Motion Sensor is Unresponsive
This is product is discontinued and replaced with ZSE70 . What does that mean? Once your sensor is powered up by USB or battery, you should see the LED indicator flash in response. If the unit works on USB but not battery, double check that the batteries are clear of their plastic wrappings and that they're orien…
Can't Add My ZSE29 Outdoor Motion Sensor to My Z-Wave System
This is product is discontinued and replaced with ZSE70 . What does that mean? Exclusion is a type of reset, and it's the first thing you should try for any type of inclusion or configuration issue. Your Outdoor Motion Sensor doesn't have to be included to your hub for it to be successfully excluded. Just follow …
ZSE40 4-in-1 Sensor Advanced Settings
This is product is discontinued and replaced with ZSE11 . What does that mean? Here is a full list of advanced settings (parameters) for the ZSE40 700 Series 4-in-1 Sensor on firmware 1.10: Temperature Sensor Parameter 1: Set the temperature unit for your sensor. NOTE: many home automation platforms will au…
There is No LED Activity and My ZSE40 4-in-1 Sensor is Unresponsive
This is product is discontinued and replaced with ZSE11 . What does that mean? Once the battery is inserted, the ZSE40 4-in-1 Sensor's LED indicator should flash any time you press the Z-Wave button. If you insert the battery and see no LED activity whatsoever, first check that the battery is inserted and oriente…
ZSE40 700 4-in-1 Sensor Change Log
This is product is discontinued and replaced with ZSE11 . What does that mean? Here are the features we added to the 4-in-1 Sensor so far. VER. 1.0 (released 9/2016) Hardware: * 2 x AAA batteries * Mounting bracket included * 500 Series Z-Wave chip Firmware: 16.09 * 4 LED indicator modes * 12h wake-up int…
My ZEN17 Universal Relay is Offline in HomeSeer
Having connectivity issues between your ZEN17 Universal Relay and HomeSeer hub? If your ZEN17 is unavailable, shows as offline, or is unresponsive to commands via HomeSeer, try these troubleshooting steps. The ZEN17 Universal Relay, when connected through the standard Z-Wave mesh, has a range of up to 300 feet line …
How to Add Your ZEN34 Remote Switch to SmartThings
You will need to install the Edge driver to have the device properly recognized on SmartThings. Please follow the instructions here to install the driver before you include the Remote Switch. We recommend the below method as the most efficient way to add any 700 series device that supports SmartStart: * Tap the …
How to Use Your ZEN34 Remote Switch With Smart Bulbs On Home Assistant
No convenient wiring? No problem! If you're looking for a battery powered wall remote and you don't want to worry about wiring, the ZEN34 Remote Switch is a handy choice. It fits in any standard electrical box or can be fixed to a wall or any flat surface for easy installation. Program the paddle on this device accor…
How to Program Your ZEN34 Remote Switch on Z-Box Hub
Pick your favorite way to program the ZEN34 from the options below! From scene control (multi-tap) to direct association, programming the ZEN34 Remote Switch on the Z-Box Hub is simple and intuitive. To program the multi-tap functions on the ZEN34, you can follow the standard block scene creation flow , or you can …
There is No LED Activity and My ZSE44 Temperature | Humidity Sensor is Unresponsive
Once the battery tab is removed, the ZSE44 Temperature | Humidity Sensor's LED indicator should flash for around 10 seconds or any time you press the Z-Wave button. Does the LED indicator fail to flash, or is the device unresponsive? First, make sure the battery is inserted correctly per the positive / negative po…
