How to Perform an OTA Firmware Update on Zooz Devices on HomeSeer
You can check out the steps below for more information on how to update your Zooz end devices via HomeSeer. * Make sure you've already downloaded the correct firmware for the device you're updating, have extracted it from the .zip file, and know where it's located on your computer * From the HomeSeer main menu, cl…
ZEN06 Smart Plug Change Log
Here is a list of updates we made to the ZEN06 model so far. VER. 1.0 (released 10/2016) Original release. Hardware: * Power monitoring, 2 USB ports (no Z-Wave control or reports), smart LED ring Firmware: 1.01 * Overload protection, reporting frequency settings VER. 2.0 (released 10/2018) Firmware: 1.03 *…
ZEN23 Toggle Switch Change Log
This is product is discontinued and replaced with ZEN73 . What does that mean? Here's where you'll find the changes and updates we made to the ZEN23 switch model so far. VER. 1.0 (released 6/2016) Original release. Hardware: * Did NOT include neutral jumper or short screws for wall plate * Implemented the c…
ZSE19 S2 MultiSiren Change Log
Here are the updates we applied to the ZSE19 model so far. VER. 1.0 (released 11/2018) Original release. Hardware: * Siren alarm, smart speaker, and LED indicator all built-in, battery power Firmware: 1.03 * S2 security, sound switch command class for smart speaker, built-in sound library, OTA firmware update…
ZEN20 Power Strip Change Log
Here are the changes and improvements we made to the ZEN20 model so far. VER. 1.0 (released 7/2017) Original release. Hardware: * No mounting screw holes, straight plug Firmware: 20.15 * No advanced settings, no power monitoring, no status recovery after power failure (defaults to off) VER. 2.0 (released 11/2…
ZEN24 Toggle Dimmer VER. 4.01 Advanced Settings
This is product is discontinued and replaced with the ZEN74 . What does that mean? Here is a full list of advanced settings (parameters) for ZEN24 Toggle Dimmer VER. 4.01 firmware: On/Off Toggle Orientation Parameter 1: Choose if you want to turn the light on or turn the light off when you toggle the switch up.…
ZEN23 On/Off Toggle Switch VER. 4.01 Advanced Settings
This is product is discontinued and replaced with ZEN73 . What does that mean? Here is a full list of advanced settings (parameters) for ZEN23 On/Off Toggle Switch VER. 4.01 firmware: On/Off Toggle Orientation Parameter 1: Choose if you want to turn the light on or turn the light off when you toggle the switch …
ZEN21 On/Off Switch VER. 4.01 Advanced Settings
Here is a full list of advanced settings (parameters) for ZEN21 On/Off Switch VER. 4.01 firmware: This is product is discontinued and replaced with ZEN71. What does that mean? On/Off Paddle Orientation Parameter 1: Choose if you want the upper paddle to turn the light on or turn the light off when tapped. Valu…
ZEN26 S2 Switch Change Log
Here is a log of upgrades and improvements we made to the S2 ZEN26 model so far. VER. 1.0 (released 10/2018) Original release. Hardware: * Included new Simple Direct 3-Way Firmware: 1.0 * Included S2 security, OTA firmware updates, built-in auto-off timer (set in seconds) VER. 2.0 (released 6/2019) Hardware…
ZEN26 S2 On/Off Switch VER. 3.02 Advanced Settings
Here is a full list of advanced settings (parameters) for ZEN26 On/Off Switch VER. 3.02 firmware: On/Off Paddle Orientation Parameter 1: Choose if you want the upper paddle to turn the light on or turn the light off when tapped. Values: 0 – Upper paddle turns the light on, lower paddle turns it off (default); 1 …
