How to Access Advanced Settings for My ZEN31 RGBW Dimmer on SmartThings
This is product is discontinued and does not have a replacement yet. New product in development. What does that mean? Looking to include and control the ZEN31 from SmartThings? While we will not be providing an official custom Edge driver for this device, there is a community driver developed by Mariano Colmenarejo…
How to Turn Off the LED Indicator on Your ZEN26 Switch
S2 Paddle Switches give you two ways to control your switch's LED indicator. If your Z-Wave hub allows access to advanced settings and parameter input, you can enable and disable the LED indicator by going to your hub's app interface and changing the value for Parameter 2 (here's how to do that in Vera and SmartT…
ZSE41 Open | Close XS Sensor Advanced Settings
Here is a full list of advanced settings (parameters) for the ZSE41 XS Open | Close Sensor: LED Indicator Parameter 1: Turn the LED indicator for open/close status change on or off. Values: 0 – LED indicator won’t blink when the sensor’s status is changed from open to close and vice versa; 1 – LED indicator wi…
ZEN34 Remote Switch Advanced Settings
Here is a full list of advanced settings (parameters) for the ZEN34 Remote Switch: LED indicator mode Parameter 1: Choose if you want the LED indicator to turn on anytime a trigger is activated (normal model) or to remain always on or off. Values: 0 – LED indicator always off; 1 – normal mode (default); 2 – LED …
Manage Files in ZSE19 MultiSiren Audio Library
This is product is discontinued and does not have a replacement yet. New product in development. What does that mean? You can upload custom audio files to your ZSE19 MultiSiren to play them as part of your automation rules. Here is how to add, remove, and organize the sounds for the device. The smart speaker is onl…
How to Access Advanced Settings for ZEN17 Universal Relay on SmartThings
SmartThings is transitioning to a new platform (the lua platform ) which makes the old Groovy custom device handlers unusable. Don't worry! You can still access your device's advanced settings! We created new custom Edge drivers for the lua platform. Below are the instructions on how to install and if you haven't a…
ZSE43 Tilt | Shock XS Sensor Advanced Settings
Here is a full list of advanced settings (parameters) for the ZSE43 XS Tilt | Shock Sensor: LED Indicator Parameter 1: Turn the LED indicator for open/close or vibration/no vibration status change on or off. Values: 0 – LED indicator won’t blink when the sensor’s either status is changed; 1 – LED indicator wil…
ZEN55 Smoke & CO Detector Bridge Advanced Settings
Here is a full list of advanced settings (parameters) for the ZEN55 Smoke & CO Detector Bridge: LED Indicator Parameter 1: Enable or disable the LED indicator to reflect the current on/off status of the connected load (LED on when the load is on, LED off when the load is off). Values: 0 – LED Indicator disabled;…
How to Access Advanced Settings for My ZEN32 Scene Controller on Home Assistant
The ZEN32 has endless possibilities for customization! With the JS integration of Home Assistant, you should have access to all of its advanced settings once you've included the Scene Controller. If you aren't on the JS integration yet, Home Assistant currently recommends handling Z-Wave devices through the new Z-W…
How to Access Advanced Settings for ZSE11 Q Sensor on SmartThings
With the SmartThings transition to a new platform (the lua platform ), the original Groovy custom device handlers are no longer supported. We have created new custom Edge drivers specifically for the lua platform. Please follow the instructions below on how to install the driver. If you haven't added one before, it…
