Can't Add My ZEN53 DC Motor Controller to My Z-Box Hub
Having an issue including your new ZEN53 DC Motor Controller? No worries, simply give the exclusion process a try! It sounds counter-intuitive, but exclusion is the best and simplest way to resolve any inclusion or configuration issues. It can be done at any time, even if a device has never been included to the hub!…
My ZAC38 Range Extender is Unresponsive to My Z-Wave System
If your ZAC38 Range Extender is powered but unresponsive to commands from your app, is not updating status, or is showing that it's offline, this is suggestive of a range or connectivity issue. The ZAC38 is an 800 series Z-Wave Plus device that has range of up to 400 feet (line of sight). However, interferences like…
My ZAC38 Range Extender Shows Offline in Hubitat
If your ZAC38 Range Extender is powered and included to Hubitat, but is showing as offline, then this points to a range, interference, or connectivity issue. This can occur when a device is out of range, didn’t configure properly when including, or there are too many interferences between the device and the hub. Tryi…
My ZSE70 Outdoor Motion Sensor is Not Reporting Reliably to My Hub
Are you experiencing issues with your ZSE70 Outdoor Motion sensor despite successfully installing and linking it to your hub? Do you find that it's consistently displaying incorrect status readings, such as being stuck on motion or no motion, or perhaps failing to generate reports altogether? Check out the troublesho…
My ZSE44 Temperature | Humidity Sensor is Not Reporting Reliably To My Hub
Have you connected and integrated your ZSE44 Temperature | Humidity sensor with the hub, only to find inconsistencies in the reports? Is it consistently failing to update values based on your programmed advanced settings or not reporting at all? Don't worry, we're ready to help you troubleshoot effectively before you…
My ZSE42 Leak Sensor is Not Reporting Reliably To My Hub
Have you installed and added your ZSE42 sensor to the hub, but you're not receiving accurate reports? Is your sensor consistently showing either wet or dry status, or is it failing to generate reports? Don't worry, we've compiled the most effective troubleshooting steps for you to try before contacting our support te…
My ZEN16 Multirelay Shows "Can't Detect Device" in Vera
A "Can't Detect Device" error suggests a range or connectivity issue. If the ZEN16 displays as "can't detect device" in your Vera app, try to resolve the issue by using Update Neighbor Nodes. This is a helpful feature in Vera's interface that allows you to refresh the connections between hub and the devices and sh…
Can't Add My ZEN54 0-10V Dimmer to SmartThings
Inclusion troubles? Please start by ensuring you have the lua Edge driver installed for the ZEN54 , in order for the device to be correctly recognized and configured on SmartThings. If you have the driver installed, give exclusion a try before including the ZEN54. The device can be excluded at any time, even if it …
Can't Add My ZEN53 DC Motor Controller to Home Assistant
If you are having difficulty including your ZEN53 DC Motor Controller to Home Assistant, the best place to start is exclusion! The device can be excluded from Home Assistant even if it has never been successfully included. Exclusion is a simple process that acts like a hub-based reset that helps with any configuratio…
My ZSE43 Tilt | Shock Sensor is Not Reporting Reliably To My Hub
Have you installed and integrated your ZSE43 Tilt | Shock sensor into the hub, but are encountering discrepancies in its reports? Is it persistently showing either open or closed status, or failing to provide reports altogether? Rest assured, we're equipped to guide you through the best troubleshooting measures befor…
