How to Access Advanced Settings for My ZSE44 Temperature | Humidity XS Sensor on Hubitat
While most settings will display for the sensor with the built-in integration, we recommend using the custom driver for the ZSE44 model for best experience. Here is how to install and assign the custom driver for the Temperature | Humidity XS Sensor on Hubitat: * Open Hubitat in your browser. * Click on Drivers …
How to Program Your ZEN34 Remote Switch on Hubitat
After you've added and assigned the correct device type to your Remote Switch, you'll be able to program the paddles to control other devices or scenes. Here is an introduction to the process. At the moment, you'll only be able to use the button controller features of the device since direct association is not ava…
ZSE29 Outdoor Motion Sensor Change Log
This is product is discontinued and replaced with ZSE70 . What does that mean? Here are the changes we made to the ZSE29 model so far. VER. 1.0 (released 11/2018) Original release. Hardware: * Battery or USB power, motion retrigger and lux setting adjustment knobs Firmware: 1.01 * S2 security, motion retri…
There is No LED Activity and My ZSE29 Outdoor Motion Sensor is Unresponsive
This is product is discontinued and replaced with ZSE70 . What does that mean? Once your sensor is powered up by USB or battery, you should see the LED indicator flash in response. If the unit works on USB but not battery, double check that the batteries are clear of their plastic wrappings and that they're orien…
Can't Add My ZSE29 Outdoor Motion Sensor to My Z-Wave System
This is product is discontinued and replaced with ZSE70 . What does that mean? Exclusion is a type of reset, and it's the first thing you should try for any type of inclusion or configuration issue. Your Outdoor Motion Sensor doesn't have to be included to your hub for it to be successfully excluded. Just follow …
ZSE40 4-in-1 Sensor Advanced Settings
This is product is discontinued and replaced with ZSE11 . What does that mean? Here is a full list of advanced settings (parameters) for the ZSE40 700 Series 4-in-1 Sensor on firmware 1.10: Temperature Sensor Parameter 1: Set the temperature unit for your sensor. NOTE: many home automation platforms will au…
There is No LED Activity and My ZSE40 4-in-1 Sensor is Unresponsive
This is product is discontinued and replaced with ZSE11 . What does that mean? Once the battery is inserted, the ZSE40 4-in-1 Sensor's LED indicator should flash any time you press the Z-Wave button. If you insert the battery and see no LED activity whatsoever, first check that the battery is inserted and oriente…
ZSE40 700 4-in-1 Sensor Change Log
This is product is discontinued and replaced with ZSE11 . What does that mean? Here are the features we added to the 4-in-1 Sensor so far. VER. 1.0 (released 9/2016) Hardware: * 2 x AAA batteries * Mounting bracket included * 500 Series Z-Wave chip Firmware: 16.09 * 4 LED indicator modes * 12h wake-up int…
How to Access Advanced Settings for the ZSE70 Outdoor Motion Sensor on Home Assistant
Adjust the Advanced Parameters to customize the ZSE70 Outdoor Motion Sensor! The ZSE70 Motion Sensor is integrated with the latest JS integration of Home Assistant . If you aren't on the JS integration yet, Home Assistant currently recommends handling Z-Wave devices through the new Z-Wave JS integration since a…
How to Program Your ZEN37 Wall Remote on Hubitat
After you've added and assigned the correct device type to your Remote Switch, you'll be able to program the buttons to control other devices or trigger scenes. Here is an introduction to the process. At the moment, you'll only be able to use the button controller features of the device since direct association is…
