Here is a full list of advanced settings (parameters) for the ZEN37 Wall Remote:
Low battery alert
Parameter 1: Choose when you want to receive a low battery alert from your device. The value corresponds to the % battery level for the device.
Values: 5 – 10 (%). Default: 5.
Size: 1 byte dec
Button 1 LED Color
Parameter 2: Choose the color of the LED indicator when button 1 (top large button, scene 1) is triggered.
Values: 0 – white; 1 – purple; 2 – orange; 3 – cyan; 4 – red; 5 – green; 6 – blue. Default: 0.
Size: 1 byte dec
Button 2 LED Color
Parameter 3: Choose the color of the LED indicator when button 2 (bottom large button, scene 2) is triggered.
Values: 0 – white; 1 – purple; 2 – orange; 3 – cyan; 4 – red; 5 – green; 6 – blue. Default: 1.
Size: 1 byte dec
Button 3 LED Color
Parameter 4: Choose the color of the LED indicator when button 3 (left small button, scene 3) is triggered.
Values: 0 – white; 1 – purple; 2 – orange; 3 – cyan; 4 – red; 5 – green; 6 – blue. Default: 2.
Size: 1 byte dec
Button 4 LED Color
Parameter 5: Choose the color of the LED indicator when button 4 (right small button, scene 4) is triggered.
Values: 0 – white; 1 – purple; 2 – orange; 3 – cyan; 4 – red; 5 – green; 6 – blue. Default: 3.
Size: 1 byte dec
LED Brightness
Parameter 6: Choose the brightness level of the LED indicator or turn the LED off completely.
Values: 0 – LED off; 1 – 10%; 2 – 20%; 3 – 30%; 4 – 40%; 5 – 50%; 6 – 60%; 7 – 70%; 8 – 80%; 9 – 90%, 10 – 100%. Default: 5.
Size: 1 byte dec
Remote Dimming Speed
Parameter 7: Set the time it takes to get from 0% to 100% brightness on dimmers and smart bulbs directly associated with your Wall Remote in Groups 4 and 5 when pressing and holding the buttons (physical dimming) on your Wall Remote. The number entered as value corresponds to the number of seconds.
Values: 1 – 99 (seconds). Default: 5.
Size: 1 byte dec
How to Access the Advanced Settings for your Wall Remote
How to Access the Advanced Settings for the ZEN37 on Home Assistant
How to Access the Advanced Settings for the ZEN37 on HomeSeer
How to Access the Advanced Settings for the ZEN37 on Hubitat
How to Access the Advanced Settings for the ZEN37 on SmartThings
How to Access the Advanced Settings for the ZEN37 on Z-Box
Central Scene Mapping
Button 1: Scene 1, Multi-Tap 2, 3, 4, or 5, held, and released
Button 2: Scene 2, Multi-Tap 2, 3, 4, or 5, held, and released
Button 3: Scene 3, Multi-Tap 2, 3, 4, or 5, held, and released
Button 4: Scene 4, Multi-Tap 2, 3, 4, or 5, held, and released
Associations
Group 1: Basic set lifeline to hub
Group 2: Basic for on (button 1: top large button) and off (button 2: bottom large button)
Group 3: Basic for on (button 3: small left button) and off (button 4: small right button)
Group 4: Multilevel start level change (held) and stop level change (released) for buttons 1 and 2 (used for remote dimming)
Group 5: Multilevel start level change (held) and stop level change (released) for buttons 3 and 4 (used for remote dimming)
Group 6: Basic to toggle device on and off in sequence when button 1 is pressed
Group 7: Basic to toggle device on and off in sequence when button 2 is pressed
Group 8: Basic to toggle device on and off in sequence when button 3 is pressed
Group 9: Basic to toggle device on and off in sequence when button 4 is pressed
Programming Instructions for the Most Popular Hubs
How to Program the ZEN37 on Alarm.com
How to Program the ZEN37 on on Home Assistant
How to Program the ZEN37 on HomeSeer
How to Program the ZEN37 on Hubitat
How to Program the ZEN37 on SmartThings
How to Program the ZEN37 on Z-Box
The ZEN37 Wall Remote can be updated via OTA firmware updates, here is how to do that. You can access all firmware files here. Questions? Just reach out to our tech support team.
