Recommended Accessories for Your ZSE18 Motion Sensor
## The ZSE18 Motion Sensor can be powered via USB **OR** battery. Below are the recommendations for both power supplies. **Note:** You can only use the ZSE18 sensor powered by either battery or USB. Please do not power the sensor with both methods at the same time, otherwise the device can be damaged. The battery in …
Recommended Accessories for Your ZEN31 RGBW Dimmer
## Searching for a reliable power supply or recommended LED strips for your ZEN31? Look no further! The ZEN31 RGBW Dimmer should be powered by a [2A rated 12 VDC Power Supply][1]. Battery based power supplies cannot be used with any of our devices. **The RGBW Dimmer cannot be powered by any type of dimmable transform…
ZSE11 Q Sensor vs ZSE40 4-in-1 Sensor: What's the Difference
## Q Sensor or 4-in-1 Sensor? Let's see which suits your installation better! The ZSE11 is like an optimized version of the ZSE40, with both monitoring for motion, temp, lux, and humidity. However, the ZSE11 comes with faster reporting. It also has an extra battery for longer battery life, in addition to USB power. L…
Recommended Accessories for Your ZEN16 Multirelay
## The ZEN16 Multirelay has a lot of potential uses - but it's very important to use the correct power supply and make the right connections! Since the ZEN16 is a dry contact device, the power supply only powers the Z-Wave chip and electronics in the unit. Therefore, the power supply doesn't need to be rated for a lo…
