## Check out our ZEN37 Wall Remote accessory recommendations below: The ZEN37 is the perfect add-on switch to put in an existing switch box or install on any flat surface, no wiring required! If you're installing the Wall Remote on a flat surface where there isn't an existing switch box, you could add a [Screwless De…
Get the right accessories to make sure your ZEN53 works well in your installation! The ZEN53 is great to: * **Control DC motors **and make your blinds, shades, and awnings smart * Create schedules for morning and evening routines * Automate your shades and awnings based on data from smart sensors, including br…
## Your ZAC38 Range Extender is ready to install out of the box. The unit is designed to boost your Z-Wave network. With the NEW 800 series chip, it helps provide faster communication and more range to support your existing Z-Wave mesh. With a back-up battery, the device can provide power outage notifications to you…
Ensure your new ZEN55 DC Signal Sensor works well in your installation! * Use with any standard **interconnect** smoke and/or CO alarms. * Always turn off the power at the breaker before handling the wiring, this is a 120 V high-voltage installation. * The last detector in series will be the one that only has 3…
## Your ZEN05 is ready to install, indoors or out! The weather-resistant housing with a protective outlet cover safeguards the outlet from dirt and debris when not in use. The ZEN05 is IP65 rated, which means it is fully dust proof and water resistant. The ZEN05 is rated for outdoor use, but some users also successf…
## Install your ZEN14, indoors or out! The protective outlet cover and the weather-resistant housing safeguards the outlet from dirt and debris when not in use. The ZEN14 is IP65 rated, which means it is fully dust proof and water resistant. The ZEN14 is rated for outdoor use, but some users also successfully use a …
## Get the right accessories to make sure your ZEN54 0-10V Dimmer works well in your installation! The ZEN54 has: * **Dimming Z-Wave control **for 0-10 V LED drivers only (do NOT user with 120 V LED bulbs) * Use with LED panels and fixtures with 0-10 V dimming drivers up to 4 A * **700 series Z-Wave chip:** mo…
## There are many applications for the ZSE41 Open | Close Sensor! ### When connected to your Z-Wave hub, it will tell you exactly if and when a door or window has been opened. ### Attach it to a kitchen cabinet to make sure it's not accessed when it's not supposed to be. Put it on a drawer to safeguard your valuable…
## The ZSE44 Temperature | Humidity Sensor needs a strong Z-Wave network. ### To power the sensor, you'll want to use the included** single CR2450 battery.** If you've just replaced the battery in your sensor and find your unit is having issues, here are a few things you can try: 1. **Make sure the batteries are …
## Make sure you have the right tools and diagrams for your ZEN74 set-up! **Tools you need:** We recommend **reading the instructions** included with your switch closely and **gathering your installation tools ****BEFORE **beginning the installation. Your ZEN74 comes with a neutral jumper in the box (needed in most i…