## **Will my Z-Wave hub work with the ZEN37 Wall Remote?** The Remote Switch was verified as compatible with the following Z-Wave systems: * **[Z-Box Hub][1] (recommended for all Zooz products)** * Home Assistant (Z-Wave JS) * Hubitat (partial functionality, [read more here][2]) * SmartThings (Edge Driver re…
## **Which Z-Wave hubs will work with my ZAC38 Range Extender?** The Range Extender was verified as compatible with the following Z-Wave systems: * **[Z-Box Hub][1] (recommended for all Zooz products)** * Home Assistant (Z-Wave JS) * [Hubitat][2] (2.2.9 or higher): custom driver needed to access advanced setti…
## The ZEN55 DC Signal Sensor is compatible with the following Z-Wave systems: * [Z-Box Hub][1] **(recommended for Zooz products)** * Home Assistant (Z-Wave JS) * Hubitat ([custom driver required][2]) * SmartThings ([Edge driver needed][3]) **_Will the device work with my alarm panel?_** * No. * Alarm …
## The ZEN53 DC Motor Controller is compatible with the following Z-Wave systems: * [Z-Box Hub][1] **(recommended for Zooz products)** * Home Assistant (Z-Wave JS) * Hubitat ([custom driver required][2]) * SmartThings ([Edge driver required][3]) **_Will the device work with my alarm panel?_** * No. * …
## The ZEN54 0-10V Dimmer is compatible with the following Z-Wave systems: * [Z-Box Hub][1] **(recommended for Zooz products)** * [Ezlo Plus][2] * [Ezlo Secure][3] * [Fibaro Home Center Lite][4] * Home Assistant (Z-Wave JS) * HomeSeer * Hubitat ([custom driver][5] needed) * SmartThings ([Edge driver][…
## **Which Z-Wave hubs will work with my ZEN14 Outdoor Double Plug?** The Outdoor Double Plug is verified as compatible with the following Z-Wave systems: * **[Z-Box Hub][1] (recommended for all Zooz products)** * [Ezlo Plus][2] (select "Generic Z-Wave device" from the Device Wizard) * [Ezlo Secure][3] (select…
## **Which Z-Wave hubs will work with my ZEN05 Outdoor Smart Plug?** The Outdoor Smart Plug is verified as compatible with the following Z-Wave systems: * **[Z-Box Hub][1] (recommended for all Zooz products)** * 2GIG (no advanced settings available) * ADT Pulse (no advanced settings available) * [Ezlo Plus][…
## Unfortunately, Wink doesn't provide blanket compatibility for all multi- channel devices. The Universal Relay may show up as a single device in Wink and will only allow you to control all of the 3 relays at the same time. Individual control of the relays will not be possible through Wink's system. If you were plan…
## Unfortunately, Wink doesn't recognize any type of multi-level sensors regardless of brand. Wink also doesn't support many of the newer Z-Wave Plus devices based on the updated command classes. You can [find out more about the Q Sensor's compatibility here][1]. We'd recommend using your ZSE11 sensor with [SmartThi…
* **[Z-Box Hub][1] (recommended for all Zooz products)** * 2GIG (no advanced settings available) * ADT Pulse (no advanced settings available) * [Ezlo Plus][2] (select "Generic Z-Wave device" from the Device Wizard list) * [Ezlo Secure][3] (select "Generic Z-Wave device" from the Device Wizard list) * Fibar…