-
How to Add the ZEN51 Dry Contact Relay to Home Assistant
Your ZEN51 Dry Contact Relay can be quickly added to Home Assistant! We recommend using the new JS Z-Wave integration for optimal results. Important Note : A steady, blinking green is the standard state for the device; as long as the unit has power, it will blink green at a steady pace. The device has an internal …
-
ZEN27 S2 Dimmer & Compatible Hubs
Will the S2 Dimmer ZEN27 work with my hub? The dimmer works great with the following Z-Wave systems: * Z-Box Hub (recommended for all Zooz products) * 2GIG (no advanced settings or scene control available) * ADT Pulse (no advanced settings or scene control available) * Alarm.com (no advanced settings or scene …
-
How to Add the ZEN17 Universal Relay to Home Assistant
With the ZEN17 installed and ready to pair, it's time to include it to Home Assistant: Before including your device, ensure the ZEN17 is properly powered. The power supply only provides power to the Z-Wave chip and electronics within the unit. Therefore, the power supply doesn't need to be rated for a lot of power, …
-
How to Program Your ZEN37 Wall Remote on Home Assistant
The Zooz ZEN37 Wall Remote is a powerful Z-Wave remote featuring four customizable physical buttons. Each button can be individually programmed to trigger automations through Central Scene commands or to directly control other Z-Wave devices using Direct Association . This dual-mode capability allows users to choo…
-
How to Add the ZSE18 S2 Motion Sensor to Home Assistant
With the new ZWaveJS integration of Home Assistant, your smart home setup becomes more seamless, robust, and future-ready. We strongly recommend upgrading to this integration to ensure your Zooz devices are recognized and function correctly. The latest Z-Wave JS UI now supports Z-Wave Long Range (ZWLR) , signif…
-
How to Configure Motion for Your ZSE40 4-in-1 Sensor on Home Assistant
This is product is discontinued and replaced with ZSE11 . What does that mean? While the 4-in-1 Sensor is compatible with Home Assistant, it may require some extra configurations to set up motion notifications. This may include hiding the binary_sensor created by Home Assistant and creating a new template for the…
-
How to Add the ZAC36 Valve Actuator to Home Assistant
Once you've successfully installed the ZAC36 on your water valve, you can pair it with your Home Assistant network. Always mount the device securely and calibrate it before trying to add the actuator to your Z-Wave system. The Titan will fit on valves up to 1.25". Is your pipe larger? Reach out to us about an exten…
-
How to Access Advanced Settings for the ZEN32 Scene Controller on Home Assistant
The ZEN32 has endless possibilities for customization! With the JS integration of Home Assistant, you should have access to all of its advanced settings once you've included the Scene Controller. If you aren't on the JS integration yet, Home Assistant currently recommends handling Z-Wave devices through the new Z-W…
-
How to Add the ZEN15 Switch to Home Assistant
Your ZEN15 Power Switch works great with Home Assistant, and it's fast and easy to include! With the new ZWaveJS integration of Home Assistant, your smart home setup becomes more seamless, robust, and future-ready. We strongly recommend upgrading to this integration to ensure your Zooz devices are recognized and …
-
ZSE19 S2 MultiSiren & Compatible Hubs
This is product is discontinued and does not have a replacement yet. New product in development. What does that mean? Will the S2 MultiSiren ZSE19 work with my hub? The S2 MultiSiren works great as a siren and sensors with the following Z-Wave systems (the smart speaker functionality is currently only available on…
Looking for Z-Box Hub Support? Please click here to access the Z-Box Hub Support Portal.
