The ZEN32 has endless possibilities for customization!
With the JS integration of Home Assistant, you should have access to all of its advanced settings once you've included the Scene Controller. If you aren't on the JS integration yet, Home Assistant currently recommends handling Z-Wave devices through the new Z-Wave JS integration since all others have essentially been abandoned and / or discontinued.
The ZEN32 has a lot of advanced settings so that you can customize the unit to fit your needs and automations. If a certain parameter setting isn't displaying for you, you can use an alternative method to make adjustments to your ZEN32 Scene Controller's settings.
You can now change any parameter manually on the JS Z-Wave integration for Home Assistant.
It needs to be done in zwavejs2mqtt and it’s not possible to do this within HA directly at the moment:
- Under node, scroll down below any exposed settings for the device (under Configuration) to the Custom Configuration section as shown in the screenshot here, where you'll see Value, Parameter and Size.
- You can enter the data according to the product documentation and click SET for the parameter to be updated.
- If you have a battery-powered device, you'll need to wake it up by performing the same activation sequence as during inclusion.
Let us know if you have any questions! We'll be happy to help.
