How to Add Your ZEN55 DC Signal Sensor to Home Assistant
## Once your ZEN55 DC Signal Sensor is properly powered and installed, it's time to include the device to Home Assistant. Inclusion is a simple process; just follow the steps below to have your device added to your Home Assistant in no time. ## We recommend using the new [JS Z-Wave integration][1] for optimal results…
How to Add Your ZEN55 DC Signal Sensor to Z-Box
## Inclusion is fast and easy with the Z-Box! You don't need any extra device handlers or drivers here! The ZEN55 DC Signal Sensor will be recognized correctly on the Z-Box, as it is fully integrated. Simply follow the instructions in the manual to install and power the device, then follow the steps below to add the d…
How to Add Your ZEN55 DC Signal Sensor to SmartThings
## Is your ZEN55 DC Signal Sensor correctly wired and powered up? All that's left is to get it included to your SmartThings hub! You'll need to make sure you [install the Edge driver][1] for the ZEN55 prior to following the inclusion steps below. ## Once the custom Edge driver is installed for your ZEN55, you can fol…
How to Add Your ZEN55 DC Signal Sensor to Hubitat
## So your new ZEN55 DC Signal Sensor is properly installed and ready to go? Let's get it included to your Hubitat hub. Including the ZEN55 DC Signal Sensor to Hubitat is simple! Follow the steps below to quickly and easily add the ZEN55 to Hubitat. Please install the ZEN55 custom driver to have complete configuratio…
How to Add Your ZEN55 DC Signal Sensor to your Z-Wave Hub
## Once you have the ZEN55 correctly installed and powered, you can include the device to your Z-Wave hub. Inclusion is another name for adding the device to your Z-Wave hub. Simply follow the steps below to have the ZEN55 included in no time! **To auto-include your ZEN55 DC Signal Sensor:** 1. Put your Z-Wave hub…
Recommended Accessories for Your ZEN55 DC Signal Sensor
Ensure your new ZEN55 DC Signal Sensor works well in your installation! * Use with any standard **interconnect** smoke and/or CO alarms. * Always turn off the power at the breaker before handling the wiring, this is a 120 V high-voltage installation. * The last detector in series will be the one that only has 3…
Can't Add My ZEN55 DC Signal Sensor to Hubitat
## Having issues getting your ZEN55 DC Signal Sensor included to Hubitat? Let's start by excluding the device first. Exclusion is a simple procedure that can be done even if the device has never been included to a hub. It is simply a soft Z-Wave reset for the device, and helps to resolve any connectivity or configura…
How to Access Advanced Settings for My ZEN55 DC Signal Sensor on SmartThings
## With SmartThings transitioning to a new platform (the [lua platform][1]), the old Groovy custom device handlers will now be unusable. But we've created a new custom Edge driver for the ZEN55 DC Signal Sensor for the lua platform! Below are the instructions on how to install and if you haven't added one before, it'…
ZEN55 DC Signal Sensor Change Log
Here is a list of the changes and updates we made to the ZEN55 DC Signal Sensor so far. ### _VER. 1.0 (released 4/2023)_ _Original release._ **Hardware:** * 800 Series Z-Wave chip * Pigtail wires for easy installation **Firmware: 1.20** * Separate reports for smoke and CO alerts * Z-Wave Long Range read…
Can't Add My ZEN55 DC Signal Sensor to My Z-Box Hub
## Having trouble including your ZEN55 to the Z-Box? Let's start simple: give the exclusion process a try! It may seem counter-intuitive, but the easiest way to resolve inclusion or configuration issues is by excluding the device first! Exclusion can be done at any time, even if a device has never been included to th…
