Zooz SmartThings Edge Drivers
SmartThings is slowly transitioning from the legacy groovy platform to the [new lua platform][1]. This creates new challenges for seamless integration as well as access to key and advanced features of our devices. As usual, we're committed to providing the best possible experience to all of our customers, regardless o…
My Z-Wave Device Won't Add To The Hub
## There are a few reasons why you may be having issues pairing your new Z-Wave device to the hub. Below we list the most common causes and how to address them so you can join your product to the network quickly and start using it in no time! _**1. THE DEVICE IS ALREADY ADDED TO A Z-WAVE NETWORK**_ ** CAUSE: **How …
ZEN51 Dry Contact Relay FAQs
## **Frequently Asked Questions About the ZEN51 Dry Contact Relay** Find the answers to your questions quickly by searching key words! 1. Press the CTRL and F keys at the same time on your keyboard. A little box should pop up in your browser window. 2. Type in a key word in your question like "hub" or "compatibl…
Can't Add My ZEN55 DC Signal Sensor to Home Assistant
## Having trouble adding your ZEN55 DC Signal Sensor to Home Assistant? Exclusion is the easiest way to resolve any configuration or connectivity issues, and the ZEN55 can be excluded from Home Assistant even if it has never been successfully included. **To exclude the ZEN55:** 1. In Home Assistant: open **Setting…
Can't Add My ZEN55 DC Signal Sensor to SmartThings
## Having an issue including your new ZEN55 DC Signal Sensor? Check that you have [the lua Edge driver installed for the ZEN55][1], to ensure the device will be correctly recognized and configured on SmartThings. Once you have verified that the proper driver is installed, you will want to start by excluding the devic…
ZEN55 DC Signal Sensor Advanced Settings
## Here is a full list of advanced settings (parameters) for the ZEN55 DC Signal Sensor: ### _LED Indicator_ **Parameter 1: **Enable or disable the LED indicator to reflect the current on/off status of the connected load (LED on when the load is on, LED off when the load is off). **Values: ** 0 – LED Indicator dis…
My ZEN55 DC Signal Sensor Shows Offline in Home Assistant
Connectivity issues? Is your ZEN55 DC Signal Sensor included and configured but showing offline and is unresponsive to commands from the hub? The best thing to try is running a network heal! The exact range for any Z-Wave device is determined by the specific structure of your home and the strength of your mesh networ…