## If there doesn't seem to be away to factory reset the ZST10 Stick using your system's interface, you can reset it with the help of the Simplicity Studio software. **What you'll need:** * A laptop or PC with at least 1 available USB port * The PC Controller software * [Download Simplicity Studio here][1]…
### The S2 USB Stick acts as an extension to your smart home software adding Z-Wave Plus communication to the network. It can act as the primary or secondary controller and will perform many functions in either role. Sending commands to Z-Wave devices is just one of them. Below, you can find the full list of tasks the…
**Here are the technical details for the S2 Stick ZST10:** * **Z-Wave Signal Frequency:** 908.42 MHz * **Power:** 4.75-5.25 VDC * **SDK: **6.81.02 * **Range:** Up to 130 feet line of sight indoors (up to 500 feet in open space) * **Installation and Use:** Indoor Only * **Operating Temperature:** 14-104° F…
## Here are the instructions for updating your 700 Series Z-Wave stick to the latest firmware available. **Please note these instructions are for the Zooz 700 series version only and cannot be applied to any other brand of Z-Wave stick or to the 500 series version of the ZST10. **If you're not sure which version you…