How to Add Your ZEN54 0-10 V Dimmer to Home Assistant
## Your ZEN54 is properly powered and installed? Now it's time to get your device included to Home Assistant. Inclusion is simple; just follow the steps below to have your device added to your Home Assistant in no time. ## We recommend using the new [JS Z-Wave integration][1] for optimal results. **Follow these step…
ZEN54 0-10V Dimmer Change Log
## Here is a list of the changes and updates we made to the ZEN54 0-10V Dimmer so far. ### _VER. 1.0 (released 2/2023)_ _Original release._ **Hardware:** * 700 Series Z-Wave chip * Pigtail wires for easy installation **Firmware: 1.20** * Set minimum and maximum brightness levels * Z-Wave Long Range read…
How to Access Advanced Settings for My ZEN54 0-10 V Dimmer on Hubitat
The ZEN54 0-10 V Dimmer should be integrated with Hubitat soon. In the meantime, please install the custom driver below to access the advanced settings and configure the device. Please check that your hub is operating on the latest Hubitat platform version first, then follow these step-by-step instructions to install…
Recommended Accessories for your ZEN54 0-10V Dimmer
## Get the right accessories to make sure your ZEN54 0-10V Dimmer works well in your installation! The ZEN54 has: * **Dimming Z-Wave control **for 0-10 V LED drivers only (do NOT user with 120 V LED bulbs) * Use with LED panels and fixtures with 0-10 V dimming drivers up to 4 A * **700 series Z-Wave chip:** mo…
ZEN54 0-10V Dimmer & Compatible Hubs
## The ZEN54 0-10V Dimmer is compatible with the following Z-Wave systems: * [Z-Box Hub][1] **(recommended for Zooz products)** * [Ezlo Plus][2] * [Ezlo Secure][3] * [Fibaro Home Center Lite][4] * Home Assistant (Z-Wave JS) * HomeSeer * Hubitat ([custom driver][5] needed) * SmartThings ([Edge driver][…
ZEN54 0-10V Dimmer Specs
**Here are the technical details and specs for the ZEN54 0-10V Dimmer:** * **Z-Wave Frequency**: 908.42 MHz (US) * **Power**: 120-240 VAC, 50/60 Hz * **Maximum Loads**: 4 A, 480W at 120V, 960 W at 240V * **Z-Wave Range**: Up to 300 feet line of sight or up to a mile with Long Range enabled) * **Dimensions**…
ZEN54 0-10 V Dimmer Advanced Settings
## Here is a full list of advanced settings (parameters) for the ZEN54 0-10 V Dimmer VER. 1.10 firmware: ### _On / Off Status After Power Failure_ **Parameter 1: **Set the on/off status or brightness level for the dimmer after power failure. **Values: ** 0 – forced to OFF (regardless of state prior to power outage…
Zooz SmartThings Edge Drivers
SmartThings is slowly transitioning from the legacy groovy platform to the [new lua platform][1]. This creates new challenges for seamless integration as well as access to key and advanced features of our devices. As usual, we're committed to providing the best possible experience to all of our customers, regardless o…
