You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
Looking for Z-Box Hub Support? Please click here to access the Z-Box Hub Support Portal.
announcement close button
Home > ZEN32 Scene Controller > ZEN32 Z-Wave Questions > ZEN32 & SmartThings > How to Access Advanced Settings for My ZEN32 Scene Controller on SmartThings
How to Access Advanced Settings for My ZEN32 Scene Controller on SmartThings
print icon

The ZEN32 Scene Controller is a powerful device - here's what you need to do to take full advantage of everything it can do. SmartThings is transitioning to a new platform (the lua platform) which makes the old Groovy custom device handlers unusable, but you'll still be able to access your ZEN32's advanced settings.

We have created new custom Edge drivers for the lua platform. Follow the simple steps below to install the new Edge driver. If you haven't added one before, it's an easy process that only takes a few minutes. It will let you customize your Scene Controller. Please read all instructions carefully before installing the driver. 

 

BEFORE YOU INSTALL:

 

INSTALLATION:

  1. Click on to the Zooz Channel invitation link here and log in with your Samsung / SmartThings account.

  2. Click Accept for Terms and Conditions.

  3. Select to Enroll your hub.

    • If you're completing the process on a mobile device, you might see the screen load as if it were completing the request, but still show the Enroll button. Please try refreshing the screen, or going back a page, and then going to the enrollment page again - it should now show the Unenroll and Available Drivers options.

  4. Click the “Available Drivers” button.

  5. Scroll through the list and click the “Install” button for the Zooz ZEN32 Scene Controller Driver.

    • If you have multiple Zooz device models, you can install as many or all drivers if you'd like so that you don't have to repeat the process for other devices going forward. You won't need to install the driver for each device model if you have multiple of the same model. For example, if you have 3 x ZEN32 you only need to install the driver once and it will work for all 3 devices.

  6. Wait a few minutes so that the updates are registered on your SmartThings hub.

  7. Join the device using the Scan QR Code method or the Scan for devices (manual inclusion) method or following the steps shown here.

  8. The device should be recognized as a Zooz ZEN32 Scene Controller.

  9. Rename the device as needed and assign it to the room you want it in.

 

To change any other the settings in the app: once the driver is installed and the device is included to your SmartThings network, click on the ZEN32 in your app and tap the 3 dots in the top right corner of the appThen tap Settings. There you'll be able to customize your device.

 

TROUBLESHOOTING:

  • Device doesn’t get identified by the correct driver / as the correct product: remove the device and try adding it again.
  • Sync Status tile is empty: it should update to show the number of pending changes as soon as you change a setting, but if it doesn’t then you can either wait about 30 minutes and reboot the hub or just wait and it should fix itself within24 hours. Note that the switch driver doesn't feature the sync status tile at all.
  • Device list in the IDE shows that it’s executing in the “cloud”: testing has confirmed that the devices execute locally in Automations as long as all the devices uses in that Automation execute locally. Because the drivers aren’t meant to be viewed in the IDE, they may not display the actual cloud vs local status correctly.
  • Questions or issues? Feel free to post them in the dedicated thread on the SmartThings community forum.

 

If you're having issues during the driver installation process, don't hesitate to reach out. We strongly encourage you to register your Zooz products here so that we can troubleshoot with you more efficiently and also gives you direct access to firmware files, extended warranty, and expedited support. 

Feedback
2 out of 5 found this helpful

scroll to top icon