For complete access to your ZEN72 Dimmer's advanced settings, install the device handler and start customizing!
The process to add a custom device handler is pretty simple and shouldn't take very long using the steps below:
-
Exclude the dimmer from your network and log in here with the same information you use for your SmartThings app.
-
Click on My Device Handlers in the top menu.
-
In the top right corner, click on "Create new device handler" and choose "from code" from the top tab menu. You'll be presented with a blank area where you can paste the code from the following link. Please click on this link to access the code, then copy ALL of the code from the page.
-
Next, scroll to the bottom and click Create.
-
Now click Save, then click Publish > For Me.
You should now see the Zooz ZEN72 700 Dimmer device type in your list of device handlers. Add the ZEN72 Dimmer Switch to your SmartThings hub by following the instructions here.
How to access the advanced settings in the SmartThings app: after adding the handler and pairing the Dimmer, click on the ZEN72 in your app and tap the 3 dots in the top right corner of the app. Then tap Settings and start customizing your new 700 series Dimmer!
Let us know if you have any questions about the process! We'll be happy to help.