Even though the ZEN26 switch is officially integrated with Hubitat, it may need a custom device driver to access all of the available advanced settings.
First, please check that your hub is running on the latest platform version. You can also see if your ZEN26 has the most recent firmware update. Then you can use the steps below to install the driver and have complete access to the settings to customize your switch:
-
Open Hubitat in your browser.
-
Click on Drivers Code in the side menu.
-
In the top right corner, click on "+New Driver" and paste the code from the following link. Please click on this link to access the code for the driver, then copy ALL of the code from the page.
-
Click Save in the top right corner.
-
You'll see a "Zooz ZEN Switch Advanced" driver in your Drivers Code list now.
-
Now add your device to Hubitat or if you already have, assign the driver to it by going to the device view and selecting the driver name from the drop-down menu under Device Type. Then click Update Device.
-
Don't skip this step: Click the Configure button, then Save, and reload the device view or refresh page for all of the new settings to appear.
If you have any questions, or are having problems accessing the advanced settings, contact us!
