How to Add the ZEN12 Motion Dimmer to Your Z-Wave System
For Z-Wave control of the ZEN12 Motion Dimmer you will need to include it to your network; a process also known as adding or pairing.
Inclusion Steps
-
Put the Z-Wave hub into inclusion/pairing mode (see your hub's manual for instructions since each brand is different)
-
Click the main button 3 times as quickly as possible, and the LED's will start blinking blue to indicate communication.
-
The LED's will turn solid green for 2 seconds when inclusion is successful, or will turn red if inclusion fails.
-
The new device should appear on your hub's device list
If you've tried manual inclusion but find the ZEN12 Dimmer is not including, please try to exclude the device, factory reset the unit, then try including again.
Please let us know if you have any questions about the process.
