No need for custom drivers here! You can unlock the full potential of your ZEN34 Remote Switch on the Z-Box Hub right from the start. View, adjust, and save advanced settings for the device directly from the WEB UI. Simply follow the instructions below to see how easy it is to edit the parameters for your ZEN34 on Z-Box.
All About Advanced Settings
The terminology for advanced settings varies depending on your Z-Wave hub. For instance, Z-Box uses the official term “Parameters.” Despite these differences in naming, the purpose remains the same: configuring consistent behavior for your device. We provide the full list of settings available for each device in our Knowledge Base.
Each advanced setting consists of four key parts:
-
Label: If your device is properly integrated with your hub, this will display as the setting's name. Hubs like SmartThings show only the label and description.
-
Parameter Number & Description: Most hubs, such as Hubitat and Home Assistant, list the parameter number along with the label and description.
-
Values: These are the selectable options for each setting. Some are simple (e.g., Enable/Disable), while others use numerical values.
-
Size: This is required in some systems when manually changing advanced settings (e.g., Home Assistant) or in hubs that do not provide direct access to settings.
At the moment, you can make changes to advanced settings for Z-Wave devices in the WEB UI only so please make sure you're logged in to your Z-Box Hub and connected to the same Wi-Fi network on your device / computer as the Z-Box Hub to make any changes.
Accessing the Advanced Settings
1. Click on Settings (gear icon) in the sidebar navigation menu on your Z-Box web interface.
2. A new screen showing all of your devices will appear.
3. Click the arrow on the right side of the ZEN34 Remote Switch
4. Click on the Parameters tab in the settings view.
5. You'll see the settings for the device listed - simply click the arrow next to the setting you want to modify to make any changes. Here is the complete list of settings for this model.
6. Click Save.
If you're having any issues with the process, please reach out to our team, we'll be happy to assist you.
