I've Wired Up My ZEN24 Dimmer Switch but There's No Manual Control
### First, check the air gap switch. This is the small switch underneath the toggle. It's an additional safety feature that cuts power to the dimmer when you're changing bulbs. **When flipped to the right, power is disabled and this may mimic a dead device. If flipped to the left, power should be enabled. ** If the …
I've Wired Up My ZEN21 On/Off Switch but There's No Manual Control
## It's possible that something about the wiring can be improved. (This is a discontinued product, replacement model: ZEN71) [Go here][1] for our general wiring guide for Zooz Ver 2.0 switches. If you have the switch installed in a multi-point set-up like a [3-way][2], [4-way][3], or [5-way][4], make sure to refer t…
I've Wired Up My ZEN22 Dimmer Switch but There's No Manual Control
### **Before anything, check the air gap switch. ** This is the small switch underneath the paddle. It's an additional safety feature that cuts power to the dimmer when you're changing bulbs. **When pushed out, power is disabled and this may mimic a dead device. If pushed in, power should be enabled.** If the air ga…
