How to Add Your ZEN58 Low Voltage XS Relay to HomeSeer
If the LED indicator on the ZEN58 is slowly blinking green, then it's properly powered. Check that you can manually toggle the connected load, and then you're ready to include the relay to your HomeSeer network! Zooz products are officially integrated with the Z-Wave Plus and the Z-Wave JS Front-End of HomeSeer. If …
How to Access Advanced Settings for My ZEN58 Low Voltage XS Relay on Hubitat
Looking to program the timer, set smart bulb mode, or change the input type? Look no further! The ZEN58 Low Voltage XS Relay has been officially integrated with Hubitat as of Hubitat version 2.4.2.134. Once you include your device, you will have access to the available settings. (*NOTE - the built-in Hubitat dr…
How to Factory Reset the ZEN58 Low Voltage XS Relay
Some ZEN58 Low Voltage XS Relay configuration issues can be resolved by a factory reset. When to perform a factory reset: * You have tried to exclude the relay from your network, or * It is unresponsive to manual and Z-Wave control A hard reset will erase all custom settings and recorded activity, returning t…
How to Access Advanced Settings for My ZEN58 Low Voltage XS Relay on Home Assistant
Set your timers, relay behavior, or turn on smart bulb mode, all from the ZEN58 Low Voltage XS Relay advanced settings! The ZEN58 relay is integrated with the latest JS integration of Home Assistant , so you should have access to all of its advanced settings once included. If you aren't on the JS integration yet, H…
How to Access Advanced Settings for My ZEN58 Low Voltage XS Relay on SmartThings
To ensure correct configuration and to provide access to the advanced settings, we've created a custom Edge driver for the ZEN58 Low Voltage XS Relay for the lua platform. Important note for SmartThings users: * For the Setting Input Type (Choose the wall switch or input type you want to connect to the relay) th…
How To Use the ZEN58 Low Voltage XS Relay With a Leak Sensor
Integrating a wired leak sensor with the ZEN58 Low Voltage Relay provides a reliable way to monitor potential water leaks while maintaining complete control over your automation setup. The ZEN58 offers the same flexible functionality as the ZEN16 MultiRelay and ZEN17 Universal Relay, giving users the ability to sep…
How to Add Your ZEN58 Low Voltage XS Relay to Hubitat
The ZEN58 Low Voltage XS Relay has been officially integrated with Hubitat as of Hubitat version 2.4.2.134. Once you include your device, you will have access to the available settings and be able to fully control the device. (*NOTE - the built-in Hubitat driver does not support the creation of a child device to mon…
ZEN58 Low Voltage XS Relay & Compatible Hubs
The ZEN58 Low Voltage XS Relay is compatible with the following Z-Wave systems: * Z-Box Hub (recommended for all Zooz products) * Home Assistant (Z-Wave JS) * HomeSeer (Z-Wave Plus or Z-Wave JS Front End) * Homey ( Zooz App for Homey ) * Hubitat (with custom driver ) * Indigo (NOTE: no security, Indigo does…
ZEN58 Low Voltage XS Relay Change Log
Here are the changes we made to the ZEN58 model so far. VER. 1.0 (released 6/2025) Original release. Hardware VER 1: * 800 Series Z-Wave Chip * Block Screw Terminal for the Power Line and Load connections * Pigtail wires for Dry Contact Switch connections * Dry Contact Relay Firmware VER 1.10: * Smart Bulb …
How to Add Your ZEN58 Low Voltage XS Relay to Home Assistant
Your ZEN58 Low Voltage XS Relay can be quickly added to Home Assistant! We recommend using the new JS Z-Wave integration for optimal results With the new ZWaveJS integration of Home Assistant, your smart home setup becomes more seamless, robust, and future-ready. We strongly recommend upgrading to this integrat…
