The Scene Controller can currently support direct association on Vera hubs!
For now, the ZEN32 buttons can only be programmed via direct association to control other devices in the Vera interface since scene control is not yet supported with Zooz switches. To control other Z-Wave devices, they would need to be added with the same security level as the ZEN32. We hope to have the device fully integrated for scene control as soon as possible!
Here are steps to add the device to your Vera controller:
- Select the Devices tab in your Vera app. Then click on the gray "+ Add Device" button
- Choose Generic Z-Wave Device from the device list
- Click the main switch button on the device 3 times very quickly
- A new Z-Wave switch will appear on your device list
If your ZEN32 Scene Controller won't pair, you can try removing or excluding it from Vera first. The process will help with any configuration issues in the network.
*Updated Disclaimer: We've seen several issues with Vera hubs properly recognizing and integrating 700 & 800 series Z-Wave devices. It seems that the mios and Vera systems are no longer updated or supported for new features and Z-Wave libraries as they're replaced with the new Ezlo platform instead.
Unfortunately, we've had to remove Vera hubs from our compatibility lists for this reason. We're not able to modify devices to accommodate older discontinued systems like these as we need to follow the current DSK for our devices to pass Z-Wave certifications and work well with active platforms that are up to date. We apologize for any inconvenience.
Reach out to us if you have any questions about your Scene Controller - we'll be happy to help!
