Use our easy steps to quickly access all of your ZEN77's advanced features, like auto turn-off timer and ramp rate control.

You'll want to follow the instructions below to make changes to any setting for your ZEN77 S2 Dimmer in your Vera interface; we used on/off status recovery as an example, but the same steps apply to all other settings. The full list of parameters for your ZEN77 can be found here. Unfortunately, Vera doesn't currently support the scene control (multi-tap) functionality of our switches.

How to change an advanced setting for your ZEN77 S2 Dimmer in Vera:

1. Open your Vera online interface (the browser dashboard, not the app)
2. Click on the Zooz ZEN77 S2 Dimmer
3. Go to Device Options
4. Click on Add configuration settings
5. Put in the following to change on/off status after power failure:
   • Variable = 8
   • Data Size = 1 byte dec
   • Desired Value =  [0 – forced to OFF (regardless of state prior to power outage); 1 – forced to ON (regardless of state prior to power outage); 2 – remembers and restores on/off status after power failure (default)]
6. Click on Save Changes

Reach out to us if you have any questions about your ZEN77 S2 Dimmer!