Having an issue with including the ZSE50 Siren & Chime to Hubitat? The best place to start is with exclusion; it's just a soft Z-Wave reset that prepares your device for inclusion.

This can be done even if the relay was never connected to your hub.

If the relay is having problems connecting to Hubitat:

1. Open Hubitat in your Internet browser

2. Go to Devices

3. Click on + Add Device in the top right corner

4. Click on Z-Wave

5. Click on Start Z-Wave Exclusion

6. Tap the “-” button 3 times quickly. The LED indicator will start blinking green, and the following message will play once: "Removing device."
7. If exclusion is successful the LED indicator on the siren will turn green for 2 seconds, and play the following message: "Device removed."

8. The app will indicate when the device is successfully excluded.

If exclusion fails, the LED indicator will turn red for 2 seconds and the following message will play once: "Removing device failed." If exclusion fails or you are unable to include the unit after a successful exclusion, please try a factory reset on the unit before attempting inclusion again.

Please let us know if you are still seeing issues with configuring your device and we will be glad to help!