After testing your switch to verify it's working manually, let's include it to your Z-Wave system:
We call it "inclusion" but there are many words for it depending on the system you're using. Inclusion is just the process of adding or pairing a device to your Z-Wave system. Here's how to include your ZEN26 On/Off Switch to your Z-Wave system:
1. Put your Z-Wave hub into inclusion mode (see your hub's manual for specific inclusion steps)
2. Tap the UPPER paddle 3 times quickly to finalize the inclusion process
3. A new on/off device will appear on your controller's device list
If you try including the switch and don't see it appear on your device list, here's what to try.
If you have any questions about the process, don't hesitate to reach out!