Once you have the ZEN55 correctly installed and powered, you can include the device to your Z-Wave hub. Inclusion is another name for adding the device to your Z-Wave hub. Simply follow the steps below to have the ZEN55 included in no time!

To auto-include your ZEN55 DC Signal Sensor:

1. Put your Z-Wave hub into inclusion/pairing mode (see your hub's manual for instructions since each brand is different). If you’re using an S2 hub, it may ask you to enter the DSK key printed on the back cover sticker to complete secure inclusion
2. The LED indicator will blink green to signal communication and turn green for 2 seconds if inclusion is successful.

To manually include your ZEN55 DC Signal Sensor: 

1. Put the Z-Wave hub into inclusion/pairing mode (see your hub's manual for instructions since each brand is different)
2. Click the Z-Wave button 3 times quickly.
3. The LED indicator will blink green to signal communication and turn green for 2 seconds if inclusion is successful.
4. The new device should appear on your hub's device list

If you've tried auto and manual inclusion but you're still unable to include the ZEN55  DC Signal Sensor, please start by excluding the device, then try inclusion again.

Please let us know if you have any questions. We're always happy to help!