After verifying that the dimmer works well manually, it's time to connect it to your SmartThings network.
You'll be able to control the dimmer remotely out of the box, however, to ensure correct configuration and to be able to access the advanced settings, please install the new lua Edge driver for the device before inclusion.
Once you've installed the driver above, check out the inclusion instructions for your ZEN24 Dimmer Switch below:
- Tap the plus icon in the home screen
- Tap Device
- Tap "Scan nearby" (in the corner of the screen)
- While the app says "Scanning...", toggle the switch UP 3 times as quickly as possible
- The app will indicate when the device connects
- Tap Edit to rename the device, and tap Done to save the name
- Tap Done to complete the setup
Once the dimmer is included, it never hurts to perform network repair to optimize connectivity. This will help SmartThings find the best communication route to the switch. Click here to learn how to repair the network.
But if you can't seem to include your dimmer to SmartThings, we'd recommend excluding it using the instructions here and then trying inclusion again.
If you have any questions about the process or you're running into issues, let us know!
