You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
Looking for Z-Box Hub Support? Please click here to access the Z-Box Hub Support Portal.
announcement close button
Home > ZSE19 Multisiren > ZSE19 Z-Wave Questions > ZSE19 & Home Assistant > How to Access Advanced Settings for ZSE19 S2 MultiSiren on Home Assistant
How to Access Advanced Settings for ZSE19 S2 MultiSiren on Home Assistant
print icon

Ready to customize your Multisiren? The device is fully integrated, so the advanced settings should be available.

The ZSE19 is integrated with the latest JS integration of Home Assistant. If you aren't on the JS integration yet, Home Assistant currently recommends handling Z-Wave devices through the new Z-Wave JS integration since all others have essentially been abandoned and / or discontinued.

 

All of the Multisiren's advanced settings should be available, but if you don't see all the settings, there is another way to make adjustments:

 

You can now change any parameter manually on the JS Z-Wave integration for Home Assistant. 

It needs to be done in zwavejs2mqtt and it’s not possible to do this within HA directly at the moment:

 

  1. Under node, scroll down below any exposed settings for the device (under Configuration) to the Custom Configuration section as shown in the screenshot here, where you'll see Value, Parameter and Size.
  2. You can enter the data according to the product documentation and click SET for the parameter to be updated.

 

Reach out to us if you need any additional assistance! We'll be happy to help.

Feedback
0 out of 0 found this helpful

scroll to top icon