You've verified that your switch is wired up and working at 100% manually. Now let's include it to your Z-Wave system:
We call it "inclusion" but it goes by many names. Inclusion is just the process of adding or pairing a device to your Z-Wave system. We mention this since different brands will use different words for the same process.
Here's how to include your On/Off Switch to your Z-Wave system:
1. Put your Z-Wave hub into inclusion mode (see your hub's manual for specific inclusion steps)
2. Toggle the switch UP 3 times quickly to finalize the inclusion process
3. A new on/off device will appear on your controller's device list
If you try including the switch and don't see it appear on your device list, not to worry! Here's what to try first.
Let us know if you have any questions during the process! We're always here to help.