Once you've wired up your ZEN76 and confirmed it works manually, it's time to add it to your Home Assistant network.
Follow these steps to include the S2 Switch to Home Assistant:
- In Home Assistant: open Configuration > Integrations > Z-Wave JS > Configure.
- Click on Add node.
- Click on Start Inclusion to initiate pairing.
- Tap the UPPER paddle 3 times as quickly as possible (LED indicator will start flashing)
- Home Assistant will confirm that the switch was added, and it will be immediately visible in your device list.
Once the switch is paired to your network, you'll be able to control it remotely, create rules and automations for it, and customize the advanced settings.
Zooz products are now officially integrated with the new ZWaveJS integration of Home Assistant. If you're experiencing issues with accessing the advanced settings of your ZEN26 we would recommend first updating to the JS integration then excluding and re-including your device to your network in order for it to be recognized correctly.
If you're not able to pair the ZEN76 to Home Assistant, try excluding it! The process is a type of soft Z-Wave reset that will help with any inclusion issues.
Reach out to us if you need help adding the ZEN76 switch to Home Assistant, or if you have any other questions!
