Start by ensuring the ZEN77 works well manually, and that you are able to fully dim and have on/off control from directly from the paddle.

Next, you can include the unit to your Z-Wave system.  Inclusion is known by a variety of terms, depending on the system you are using; adding, pairing, etc., but our standard term for it is "inclusion." It is simply the process of adding the device to your Z-Wave system.

Below are the general steps to include your ZEN77 S2 Dimmer to your Z-Wave system:

1. Put your Z-Wave hub into inclusion mode (see your hub's manual for specific inclusion steps)
2. Tap the UPPER paddle 3 times quickly to finalize the inclusion process

3. The LED indicator will blink blue to signal communication, and turn green for 3 seconds if inclusion is successful, or turn red for 3 seconds if the pairing attempt fails
3. A new dimmer device will appear on your controller's device list

If the LED indicator turns red for 3 seconds, this indicates that the inclusion attempt failed. Please try the steps located here if inclusion failed.

If you have any questions about the process, let our team know!