You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Looking for Z-Box Hub Support? Please click here to access the Z-Box Hub Support Portal.
Can't Add My ZEN24 Dimmer to Home Assistant
print icon

This is product is discontinued and replaced with the ZEN74. What does that mean?

If you're having issues including your dimmer to Home Assistant, exclusion is the first thing to try; exclusion is like a soft reset: 

A device doesn't need to be included first to be able to be excluded. Here's how to do it: 

  1. In Home Assistant: open Settings Devices and Services Z-Wave JS > Configure
  2. Click on Remove Device
  3. Click on Start Exclusion
  4. Toggle the switch DOWN 3 times very quickly to finalize the exclusion process
  5. The device will now be removed, but that won’t show until you restart Home Assistant
  6. Run a Heal Network so all the other nodes learn about its removal

After exclusion is confirmed, try adding the device back to Home Assistant again. 

 

If that didn't work, here are some troubleshoots we find helpful: 

  • Try the exclusion process again! It's possible the exclusion commands from the first run weren't registered correctly. 
  • Try the inclusion process once more,  this time toggling the switch UP 6-7 times as quickly as possible. This can help make sure the commands go through.
  • If you have a Z-Wave signal repeater available (switch, relay, smart plug, dedicated repeater - any Z-Wave device that doesn't rely on battery power), we'd recommend moving it between the switch and hub and then healing the network. This can help in case there is an interference or range issue preventing stable communication between the two nodes. 
  • If possible, try bringing the hub within direct range of the switch if you were at a large distance the first time. If you have a hand-held secondary controller, this would be the time to bring it out!
  • And if you find that your dimmer is connected but it's not responded to remote commands, try these tips for troubleshooting connectivity issues. 

If you've tried all the above with no luck, let us know! Our team is ready to help. 

Feedback
0 out of 0 found this helpful

Have you tried our virtual assistant chatbot? This AI tool can help you find answers from thousands of articles in our Knowledge Base quickly. Find it in the bottom righthand corner of the page.

Need more help? Our friendly team is ready to help you with any questions or concerns you may have about Zooz devices. Click here to submit a support ticket.

Are your devices registered? Extended warranty and firmware access is available for registered Zooz customers. Click here to submit your registration form.

Find the latest Zooz devices and great Z-Wave deals at The Smartest House.
 
scroll to top icon